Boom - Fore Boom
Show/hide table
 | |
| Illustration 1 | g03398289 |
Show/hide table
| Specification for 123-8930 Fore Boom Gp | |||
| Item | Qty | Part | Specification Description |
| All bores must be free of paint. Use the 5P-0960 Grease Cartridge in order to coat all bores for pins, the stub boom, the stick, and the cylinder pin bores. | |||
| 1 | 1 | 172-5863 Pin As | Diameter is 59.850 ± 0.025 mm (2.3563 ± 0.0010 inch). |
| 2 | 2 | 139-6830 Bushing | Bore of the bushing before assembly is 70.23 ± 0.02 mm (2.763 ± 0.001 inch). |
| 3 | 1 | 172-5855 Pin As | Diameter is 69.950 ± 0.025 mm (2.7539 ± 0.0010 inch). |
| 4 | 1 | 150-4699 Pin As | Diameter is 69.850 ± 0.025 mm (2.7501 ± 0.0010 inch). |
| 5 | 2 | 093-0118 Shim | As required, use the shim of thickness 2.0 mm (0.08 inch) to adjust maximum lateral clearance of 1.0 mm (0.04 inch). |
| 6 | As required, use the following shims to adjust a maximum lateral clearance of 1.0 mm (0.04 inch): |
||
| 1 | 093-0065 Shim | Thickness is 1.0 mm (0.04 inch). |
|
| 1 | 099-7091 Shim | Thickness is 1.5 mm (0.06 inch). |
|
| 7 | As required, use the following shims to adjust a maximum lateral clearance of 1.0 mm (0.04 inch): |
||
| 1 | 133-2424 Shim | Thickness is 0.5 mm (0.02 inch). |
|
| 1 | 093-0086 Shim | Thickness is 1.0 mm (0.04 inch). |
|
| 8 | As required, use the following shims to adjust a maximum lateral clearance of 1.0 mm (0.04 inch): |
||
| 1 | 093-0086 Shim | Thickness is 1.0 mm (0.04 inch). |
|
| 1 | 7Y-2496 Shim | Thickness is 1.6 mm (0.06 inch). |
|
| 9 | As required, use the following shims to adjust a maximum lateral clearance of 1.0 mm (0.04 inch): |
||
| 1 | 133-2717 Shim | Thickness is 0.5 mm (0.02 inch). |
|
| 1 | 093-0097 Shim | Thickness is 2.0 mm (0.08 inch). |
|
| 10 | 1 | 8T-4780 Bolt | Torque to 570 ± 80 N·m (420 ± 59 lb ft). |
Caterpillar Information System:
312B Excavator Attachments Lowering Control Valve (Boom) - Test
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Alternator and Regulator
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Accumulator - Remove and Install
315B L Excavator Storage Box
M312 Excavator Machine System Boom - Stub Boom
315B L Excavator Cooling System Level - Check
315B and 315B L Excavator Hydraulic System Relief Valve (One Way Flow Line) - Test and Adjust
315B L Excavator Cooling System Hoses - Inspect
311B and 312B Excavators Hydraulic System Pressure Specifications - 311B
315B L Excavator Cooling System Coolant Extender (ELC) - Add
315B L Excavator Cooling System Coolant Additive (DEAC) - Add
315B L Excavator Fuel System Secondary Filter - Replace
311B and 312B Excavators Hydraulic System Pressure Specifications - 312B and 312B L
312B Excavator Attachments Two-Way Hydraulic Flow Operation
311B and 312B Excavators Hydraulic System Relief Valve (Pilot) - Test and Adjust
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Fuel System Water Separator - Drain
M312 Excavator Machine System Lines (Hammer) - Boom (One Piece)
311B and 312B Excavators Hydraulic System Relief Valve (Main) - Test and Adjust
5130 Excavator Hydraulic System Pump Drive
5130B Excavator Hydraulic System Final Drive
M312 Excavator Machine System Lines (Hammer) - Boom (Variable)
M312 Excavator Machine System Auxiliary Hydraulic Lines - Boom (One Piece)
M312 Excavator Machine System Auxiliary Hydraulic Lines - Boom (One Piece)
311B and 312B Excavators Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil