Tooling Available To Tighten Cab Mounting Bolts {7301,0602,0765}
Usage:
5130 (7TJ, 5ZL),
5230 (7LL) Excavators
Two different tools are available to tighten cab mounting bolts on all 5130/5230 Excavators:
-
- 1. 1U-6221 Wrench with 132-8143 Hex Link, 36 mm (1.4 in) head can be used.
- 2. 4C-9565 Box End Wrench with 8T-9294 Torque Wrench can work as a click type torque wrench. The ratcheting head should be replaced with the box end wrench.
- 1. 1U-6221 Wrench with 132-8143 Hex Link, 36 mm (1.4 in) head can be used.
Side view of cab (1) looking from the boom area to the cab.
Detail A. Typical cab mounting bolt.
Caterpillar Information System:
1997/02/24 New Larger Steel Retainers Used In Return Line Manifold Increase Service Life {5057}
1997/02/24 Some Service Parts Available For Engine Fuel Injection Pump {1251}
1997/02/17 VIMS-PC Version 2.1 Now Available {7601}
1997/02/17 New Motor Rotating Group Used And New Swing Motor Group Used To Improve Handling {5058}
1997/02/10 Updates To Hydraulic Excavator Engine Due To Underspeed Electronics {1408,1920}
1997/02/10 New Hose Used In Hydraulic Front Lines For Combining Stick Flow Between Control Valves Provides Longer Service Life {5057}
1997/02/10 Hydraulic System Pressure Relief Valve Substitution {5069,5072}
1997/02/03 New Gasket With Integral Rubber Seal Used Between Air Compressor And Front Housing {1803}
1997/02/03 North American Sources For Barum® Original Equipment Manufacturer Tires {4203}
1997/01/27 130-6061 Hose Cleaner Group For Cleaning Insides Of Hydraulic Tubes, Lines And Hoses {5057,0738}
1997/01/27 131-3961 Tool Group For Reclaiming Tooling From XT Hose Assemblies {5057}
1997/01/27 127-1069 Timing Pin Used To Set Piston At 100° BTDC When Testing And Adjusting Fuel Systems {1250}
1997/02/24 Lubrication Pump Group Container Assembly Now Available As A Serviceable Part {7540,7510}
1997/02/24 Resetting Event Recorder And Service Lamp For VIMS {7601}
1997/02/24 Information Needed For VIMS Support {7601}
1997/03/03 New Circuit Breaker Panel Base Improves Reliability {1417}
1997/03/03 Improved Bushing O-Ring Seal Available For Injection Pump Groups {1251}
1997/03/03 New Harness Assembly For 3500 Electronic Unit Injector (EUI) Engines And 3500B Engines {1408}
1997/03/03 Installation Of Piston Pin Retainer {1215}
1997/03/10 Technical Information "Bargain List" {0374,0375}
1997/03/10 Correct Identification Of Flexible Coupling Group {3252}
1997/03/10 Identifiers Detect Contaminated Air Conditioning Refrigerant {1800,1802,7320}
1997/03/10 Proper Tensioning Of V-Belt Improves Air-Conditioning Compressor Service Life {1807,7320,1800}
1997/03/17 New Washers Used In Oil To Air Cooler Group To Improve Service Life{1374}