1997/02/24 Caterpillar


Some Service Parts Available For Engine Fuel Injection Pump {1251}

Usage:


914G (7ZM, 9WM) Wheel Loaders;
IT14G (8ZM, 1WN) Integrated Toolcarriers;
M312 (6TL),
M315 (7ML) Excavators

SUPPLEMENT: 09/08/97

Service Magazine; February 24, 1997; Page 4; "Some Service Parts Available For Engine Fuel Injection Pump"

In the Chart, the Part Number (141-8945) for item 4 is not correct. The correct Part Number for Item 4 (the Boost Pipe Assembly) is 149-7634.

--------------- END SUPPLEMENT ---------------

There are some service parts available for the 123-2937 and 127-2230 Fuel Injection Pump Groups on the 3054 Engines in these machines. The chart and illustration identify the parts that are available for part service.


Identification of serviceable parts for the 123-2937 and 127-2230 Fuel Injection Pump Groups.

Caterpillar Information System:

1997/02/17 VIMS-PC Version 2.1 Now Available {7601}
1997/02/17 New Motor Rotating Group Used And New Swing Motor Group Used To Improve Handling {5058}
1997/02/10 Updates To Hydraulic Excavator Engine Due To Underspeed Electronics {1408,1920}
1997/02/10 New Hose Used In Hydraulic Front Lines For Combining Stick Flow Between Control Valves Provides Longer Service Life {5057}
1997/02/10 Hydraulic System Pressure Relief Valve Substitution {5069,5072}
1997/02/03 New Gasket With Integral Rubber Seal Used Between Air Compressor And Front Housing {1803}
1997/02/03 North American Sources For Barum® Original Equipment Manufacturer Tires {4203}
1997/01/27 130-6061 Hose Cleaner Group For Cleaning Insides Of Hydraulic Tubes, Lines And Hoses {5057,0738}
1997/01/27 131-3961 Tool Group For Reclaiming Tooling From XT Hose Assemblies {5057}
1997/01/27 127-1069 Timing Pin Used To Set Piston At 100° BTDC When Testing And Adjusting Fuel Systems {1250}
1997/01/27 Install Oil Seal Assembly And Wear Sleeve Assembly Onto Crankshaft With 127-1591 Installer {1161,0714}
1997/01/27 Cylinder Head Stress Plate Used During Cylinder Bore Honing And Measurement {1223}
1997/02/24 New Larger Steel Retainers Used In Return Line Manifold Increase Service Life {5057}
1997/02/24 Tooling Available To Tighten Cab Mounting Bolts {7301,0602,0765}
1997/02/24 Lubrication Pump Group Container Assembly Now Available As A Serviceable Part {7540,7510}
1997/02/24 Resetting Event Recorder And Service Lamp For VIMS {7601}
1997/02/24 Information Needed For VIMS Support {7601}
1997/03/03 New Circuit Breaker Panel Base Improves Reliability {1417}
1997/03/03 Improved Bushing O-Ring Seal Available For Injection Pump Groups {1251}
1997/03/03 New Harness Assembly For 3500 Electronic Unit Injector (EUI) Engines And 3500B Engines {1408}
1997/03/03 Installation Of Piston Pin Retainer {1215}
1997/03/10 Technical Information "Bargain List" {0374,0375}
1997/03/10 Correct Identification Of Flexible Coupling Group {3252}
1997/03/10 Identifiers Detect Contaminated Air Conditioning Refrigerant {1800,1802,7320}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.