3054 and 3056 Industrial and Generator Set Engines Caterpillar


Air Cleaner

Usage:

3056 1ML



Illustration 1g00880111

(1) Tighten the clamp to the following torque. ... 25 ± 7 N·m (18 ± 5 lb ft)

(2) Tighten the clamp to the following torque. ... 25 ± 7 N·m (18 ± 5 lb ft)

(3) Tighten the nut to the following torque. ... 6.0 ± 1.0 N·m (53 ± 9 lb in)

Caterpillar Information System:

797 Off-Highway Truck Hydraulic System Relief Valve (Hoist Cylinder Head End) - Test and Adjust
C12 Marine Engines Closed Crankcase Ventilation (CCV) Fumes Disposal Filter - Replace
G3500 Engines Spacer Plate - Remove and Install
3054 and 3056 Industrial and Generator Set Engines Fuel Lines
3054, 3054B and 3056 Marine Engines Fuel Filter and Water Separator
3034 Engine for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
3524B Engine for Caterpillar Built Machines Piston Cooling Jets - Remove and Install
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors General Information
3054 and 3056 Industrial and Generator Set Engines Fuel Filter Base
G3500 Engines Piston and Connecting Rods - Install
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Valve Rocker Arms and Lifters
3500 and 3500B Engines Walk-Around Inspection - Exercise Inspection of Standby Generator Set Engines
3408E and 3412E Engines for Caterpillar Built Machines Camshaft Bearings - Remove and Install
C-9 Engines for Caterpillar Built Machines Turbocharger - Inspect
797 Off-Highway Truck Hydraulic System Relief Valve (Hoist Cylinder Rod End) - Test and Adjust
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Valve Mechanism Cover
3500B Locomotive Engines Engine Air Cleaner Differential Pressure - Check
3500 and 3500B Engines Fan Drive Bearing - Lubricate
3500 and 3500B Engines Starting the Engine
G3520C and G3520E Engines Auxiliary Drive (Lower Left Hand)
3500 and 3500B Engines Emergency Stopping
3500 and 3500B Engines Manual Stop Procedure
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors Component Description
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors General Information
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.