3524B Engine for Caterpillar Built Machines Caterpillar


Piston Cooling Jets - Remove and Install

Usage:

3524B 1AW

拆卸步骤

开始:

  1. 如有必要,拆卸发动机机油泵。 参考拆解与组装, "发动机机油泵 - 拆卸"。


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。


  1. 从发动机侧拆卸缸盖。


    图 1g00913178


    图 2g00913185

  2. 拆卸螺栓 (1)和挡圈 (2)。

  3. 从发动机内侧拆卸活塞冷却喷嘴 (3)。

安装步骤


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。




    图 3g00913185


    图 4g00913178

  1. 在发动机壳体上安装活塞冷却喷嘴 (3)。 确保喷嘴末端的机油孔正对着活塞。

  2. 安装挡圈 (2)和螺栓 (1)。

  3. 在发动机侧安装缸体护罩。

结束:

  1. 如有必要,安装发动机机油泵。 参考拆解与组装, "发动机机油泵 - 安装"。

Caterpillar Information System:

RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors General Information
3054 and 3056 Industrial and Generator Set Engines Fuel Filter Base
G3500 Engines Piston and Connecting Rods - Install
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Valve Rocker Arms and Lifters
3500 and 3500B Engines Walk-Around Inspection - Exercise Inspection of Standby Generator Set Engines
3034 Engine for Caterpillar Built Machines Engine Oil Relief Valve - Remove and Install
3054 and 3056 Industrial and Generator Set Engines Fuel Injection Lines
3126B Marine Engine Fuel System
3500B High Displacement Generator Set Engines Engine Oil and Filter - Change
3500 and 3500B Engines Cooling System Coolant (ELC) - Change
Electronic Modular Control Panel II+ (EMCP II+) Starting Motor Magnetic Switch - Test - 3306B and 3406C MUI Engines
3116 Truck Engine Gauges and Indicators
3034 Engine for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
3054, 3054B and 3056 Marine Engines Fuel Filter and Water Separator
3054 and 3056 Industrial and Generator Set Engines Fuel Lines
G3500 Engines Spacer Plate - Remove and Install
C12 Marine Engines Closed Crankcase Ventilation (CCV) Fumes Disposal Filter - Replace
797 Off-Highway Truck Hydraulic System Relief Valve (Hoist Cylinder Head End) - Test and Adjust
3054 and 3056 Industrial and Generator Set Engines Air Cleaner
3408E and 3412E Engines for Caterpillar Built Machines Camshaft Bearings - Remove and Install
C-9 Engines for Caterpillar Built Machines Turbocharger - Inspect
797 Off-Highway Truck Hydraulic System Relief Valve (Hoist Cylinder Rod End) - Test and Adjust
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Valve Mechanism Cover
3500B Locomotive Engines Engine Air Cleaner Differential Pressure - Check
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.