3500 and 3500B Engines Caterpillar


Walk-Around Inspection - Exercise Inspection of Standby Generator Set Engines

Usage:

3516B 1NW

  • 執行說明於本操作與保養手冊, "啟動引擎前"章節 (操作部分)的程序。

  • 依本操作與保養手冊, "啟動引擎"章節 (操作部分)啟動引擎。


    注意事項

    無論出現何種類型的洩漏 (冷卻液、潤滑油或燃油),都要將液體清除乾淨。 如果觀察到洩漏,要找到源頭,並修復此洩漏。 如果懷疑有洩漏,要進行比規定更為經常的液位檢查,直到發現洩漏或解決洩漏為止,或者證明對此洩漏的疑慮是多餘的。


  • 在啟動引擎後執行安裝的檢查。 檢查洩漏 聆聽不尋常的噪音。

    • 當引擎操作於最低閒置時間時,請檢查引擎油位。 在油位儀錶 (量油計) 的"低怠速"側觀察油位。

    • 檢查潤滑油系統是否有油盤、油篩檢程式和汽門蓋遺漏。

    • 在軟管連接處檢查冷卻系統是否洩漏。

    • 檢查空氣進口系統管路和彎頭是否有裂縫以及鬆動的夾子。

    • 檢查排氣系統是否洩漏。

    • 若外殼有天窗,則請以適當的操作檢查天窗。

    • 觀察儀錶。 請確認引擎轉速的正確讀數。 紀錄儀表資料。

    • 紀錄發電機效能的資料。 請參見用於發電機和控制面板的操作與保養手冊。

  • 請依此操作與保養手冊, "引擎熄火的標題"(操作部分)在發電機設定運轉後,停止運轉引擎。

  • 執行說明於本操作與保養手冊, "引擎停止後"章節 (操作部分)的程序。

  • 請確認控制開關位於發電機組自動啟動的正確位置。
  • Caterpillar Information System:

    3034 Engine for Caterpillar Built Machines Engine Oil Relief Valve - Remove and Install
    3054 and 3056 Industrial and Generator Set Engines Fuel Injection Lines
    3126B Marine Engine Fuel System
    3500B High Displacement Generator Set Engines Engine Oil and Filter - Change
    3500 and 3500B Engines Cooling System Coolant (ELC) - Change
    Electronic Modular Control Panel II+ (EMCP II+) Starting Motor Magnetic Switch - Test - 3306B and 3406C MUI Engines
    3116 Truck Engine Gauges and Indicators
    3176B Marine Engine Maintenance Interval Schedule
    3116 Truck Engine Engine Storage
    3408E and 3412E Engines for Caterpillar Built Machines Crankshaft Rear Seal - Install
    3500 and 3500B Engines Cooling System Coolant (DEAC) - Change
    3034 Engine for Caterpillar Built Machines Engine Oil Pan - Remove and Install
    3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Valve Rocker Arms and Lifters
    G3500 Engines Piston and Connecting Rods - Install
    3054 and 3056 Industrial and Generator Set Engines Fuel Filter Base
    RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors General Information
    3524B Engine for Caterpillar Built Machines Piston Cooling Jets - Remove and Install
    3034 Engine for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
    3054, 3054B and 3056 Marine Engines Fuel Filter and Water Separator
    3054 and 3056 Industrial and Generator Set Engines Fuel Lines
    G3500 Engines Spacer Plate - Remove and Install
    C12 Marine Engines Closed Crankcase Ventilation (CCV) Fumes Disposal Filter - Replace
    797 Off-Highway Truck Hydraulic System Relief Valve (Hoist Cylinder Head End) - Test and Adjust
    3054 and 3056 Industrial and Generator Set Engines Air Cleaner
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.