740 GC Articulated Truck Caterpillar

Declaration of Conformity

Usage:

740 GC 3F8

Show/hide table

Table 1
An EU Declaration of Conformity document was provided with the machine if it was manufactured to comply with specific requirements for the European Union. In order to determine the details of the applicable Directives, review the complete EU Declaration of Conformity provided with the machine. The extract shown below from an EU Declaration of Conformity for machines that are declared compliant to "2006/42/EC" applies only to those machines originally "CE" marked by the manufacturer listed and which have not since been modified.


ORIGINAL EU DECLARATION OF CONFORMITY

Manufacturer: Caterpillar, Inc.,Peoria, Illinois, 61628, U.S.A.
Person authorized to compile the Technical File and to communicate relevant part (s) of the Technical File to the Authorities of European Union Member States on request:
			Standards & Regulations Manager,Caterpillar France SAS 40 Avenue Leon-Blum 38000 Grenoble, France
I, the undersigned, _________, hereby certify that the construction equipment specified hereunder
Description:		Generic Denomination:	Earth-moving Equipment
		Function:	Dumper
		Model/Type:	740 GC
		Serial Number:
		Commercial Name:	Caterpillar
Fulfills all the relevant provisions of the following Directives

	Directives		Notified Body	Document No.
	2006/42/EC		N/A
	2000/14/EC amended by 2005/88/EC, Note (1)
	2014/30/EU		N/A

Note (1)		Annex -_____ Guaranteed Sound Power Level -_____dB (A) Representative Equipment Type Sound Power Level - _____dB (A) Engine Power per ____-____ kW Rated engine speed - _____ rpm Technical Documentation accessible through person listed above authorized to compile the Technical File


Done at:				Signature
Date:				Name/Position

Note: The above information was correct as of November 2018, but may be subject to change, please refer to the individual declaration of conformity issued with the machine for exact details.

Caterpillar Information System:

Steering Pin Puller and Tri-Link Support {0599, 0732, 4305} Steering Pin Puller and Tri-Link Support {0599, 0732, 4305}

24 Motor Graders Engine Supplement Water Separator and Fuel Filter (Primary) - Remove and Install

Exhaust Gas Valve (NRS) on Certain C7.1 and C6.6 Engines {1082} Exhaust Gas Valve (NRS) on Certain C7.1 and C6.6 Engines {1082}

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Water Spray Group - Lines

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Water Spray Group - Lines

New Monitor Software Is Now Available for Certain Track-Type Tractors and Various Products {7490, 7601, 7603, 7610, 7620} New Monitor Software Is Now Available for Certain Track-Type Tractors and Various Products {7490, 7601, 7603, 7610, 7620}

An Improved Transmission Clutch Housing Is Now Used on Certain 972L and 972M Medium Wheel Loaders {3160} An Improved Transmission Clutch Housing Is Now Used on Certain 972L and 972M Medium Wheel Loaders {3160}

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Operator Console

Check the Window Glass for Correct Lubricant on Certain R1700 Load Haul Dump Machines {7310} Check the Window Glass for Correct Lubricant on Certain R1700 Load Haul Dump Machines {7310}

Rework Procedure for Heater Hold Down on Certain SE50 V Asphalt Screeds {1408} Rework Procedure for Heater Hold Down on Certain SE50 V Asphalt Screeds {1408}

New Orifices to Reduce the Speed of Hydraulic End-gates are Now Available for certain SE50VT and SE60VT XW Asphalt Screeds {5479} New Orifices to Reduce the Speed of Hydraulic End-gates are Now Available for certain SE50VT and SE60VT XW Asphalt Screeds {5479}

Improved Transmission Hose Routing is Used on Certain 994K Wheel Loaders {3016, 3154} Improved Transmission Hose Routing is Used on Certain 994K Wheel Loaders {3016, 3154}

New Diesel Exhaust Fluid (DEF) Lines are Now Used on Certain Cat® Engines {108U} New Diesel Exhaust Fluid (DEF) Lines are Now Used on Certain Cat® Engines {108U}

New Diesel Exhaust Fluid (DEF) Lines are Now Used on Certain Cat® Machine Engines {108U} New Diesel Exhaust Fluid (DEF) Lines are Now Used on Certain Cat® Machine Engines {108U}

Machine Fluids Recommendation Publications Have Been Updated {0113, 0374, 0645} Machine Fluids Recommendation Publications Have Been Updated {0113, 0374, 0645}

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Undercarriage Frame

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Hydraulic Oil Filter

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Control Manifold

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Control Valve and Mounting

Lockable Hood Latch May Not Open With a New Cat Key on Certain TH3510D, TH357D, and TH408D Telehandlers {7251} Lockable Hood Latch May Not Open With a New Cat Key on Certain TH3510D, TH357D, and TH408D Telehandlers {7251}

Diesel Particulate Filter Maintenance on Certain C2.4, C3.3B, and C3.8 Machine Engines {108F, 7500} Diesel Particulate Filter Maintenance on Certain C2.4, C3.3B, and C3.8 Machine Engines {108F, 7500}

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Control Valve

New Greasable Bearings for the Main Frame and the Swing Cylinder Trunnions Are Now Used on Certain 416F2 and 420F2 Backhoe Loaders {7054} New Greasable Bearings for the Main Frame and the Swing Cylinder Trunnions Are Now Used on Certain 416F2 and 420F2 Backhoe Loaders {7054}

Rework Procedure to Increase Oil Flow in the Final Drive Brake Housing on Certain D6K and PL61 Track-Type Tractors {4050, 4056, 4251, 4267} Rework Procedure to Increase Oil Flow in the Final Drive Brake Housing on Certain D6K and PL61 Track-Type Tractors {4050, 4056, 4251, 4267}