An Improved Transmission Clutch Housing Is Now Used on Certain 972L and 972M Medium Wheel Loaders {3160} Caterpillar


An Improved Transmission Clutch Housing Is Now Used on Certain 972L and 972M Medium Wheel Loaders {3160}

Usage:

972M A8P
Wheel Loader
972L (S/N: RFB174-177,1072-1090,1092-1093,1097-1097,1100-1101,1103-1104,1106-1116; YJW1-10214,10216-10220)
972M (S/N: L8E203-216,1201-1229; LSJ1-162,1520-1697,1700-1701,1706-1708,1712-1712,1720-1760,1762-1767,1769-1774,1778-1779,1781-1782,1785-1785,1798-1803,1807-1807,1813-1813,1834-1834,1838-1838,1840-1840,1843-1843,1855-1856,1858-1863,1865-1866,1870-1870,1902-1909,1911-1912; GGN1-1,10202-10222,10224-10237; WGN175-183,191-191; A8P1-688,901-1094,1501-1642,1647-1647,1652-1652,1661-1661,1663-1663,1667-1667,1674-1674; JPR557-610,801-960; M8W1-1,10202-10221,10223-10226,10229-10235)

Description Of Change: A new reverse clutch housing is now used in the transmission of the machines listed. The new clutch housing replaces the old clutch housing. The new housing uses a 12.01 mm (0.473 inch) diameter pilot hole at the threaded hole where the transmission housing bolt threads into the housing to provide improved support for the bolt.

------ WARNING! ------

Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.


Adaptable To: The following parts are adaptable to the machines within the listed serial numbers, and are effective with all machines after the listed serial numbers.

The new 544-0584 Clutch Housing As replaces the 364-4485 Housing As.

Note: Older versions of the 364-4485 Housing As use the 12.01 mm (0.473 inch) pilot hole diameter and the change to 12.7 mm (0.50 inch) diameter was effective with machines manufactured approximately from Forth Quarter 2015and later.

Note: Early versions of the 544-0584 Clutch Housing As used in production still have the 364-4486 Clutch Housing part number cast into the housing. The current version of the 544-0584 Clutch Housing As used in production and all 544-0584 Clutch Housing As sold through the parts system have the new 541-6601 Clutch Housing cast into the housing.

Table 1
Parts List 
Item  Qty  New Part No.  Description  Former Part No. 
544-0584  Clutch Housing As  364-4485 

Caterpillar Information System:

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Operator Console
Check the Window Glass for Correct Lubricant on Certain R1700 Load Haul Dump Machines {7310} Check the Window Glass for Correct Lubricant on Certain R1700 Load Haul Dump Machines {7310}
Rework Procedure for Heater Hold Down on Certain SE50 V Asphalt Screeds {1408} Rework Procedure for Heater Hold Down on Certain SE50 V Asphalt Screeds {1408}
New Orifices to Reduce the Speed of Hydraulic End-gates are Now Available for certain SE50VT and SE60VT XW Asphalt Screeds {5479} New Orifices to Reduce the Speed of Hydraulic End-gates are Now Available for certain SE50VT and SE60VT XW Asphalt Screeds {5479}
Improved Transmission Hose Routing is Used on Certain 994K Wheel Loaders {3016, 3154} Improved Transmission Hose Routing is Used on Certain 994K Wheel Loaders {3016, 3154}
Cat® Object Detection Software Update Is Now Available for Certain Soil Compactors, Wheel Dozers, and Wheel Loaders {1439, 7347, 7348, 7490, 7610, 7620} Cat® Object Detection Software Update Is Now Available for Certain Soil Compactors, Wheel Dozers, and Wheel Loaders {1439, 7347, 7348, 7490, 7610, 7620}
Installation of Aftermarket Seatbelt Alert kit on Caterpillar<SUB>&reg;</SUB> 773D and 777D Off-Highway Trucks {1408, 7327, 7400} Installation of Aftermarket Seatbelt Alert kit on Caterpillar<SUB>&reg;</SUB> 773D and 777D Off-Highway Trucks {1408, 7327, 7400}
The Slack Adjuster Group May Fail on Certain 770G, 772G, 773G, and 775G Off-Highway Trucks {4261} The Slack Adjuster Group May Fail on Certain 770G, 772G, 773G, and 775G Off-Highway Trucks {4261}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Air Cleaner
An Improved Rear Pump drive Bolt Used on Certain 994K Wheel Loaders {3108} An Improved Rear Pump drive Bolt Used on Certain 994K Wheel Loaders {3108}
Unable to View Snapshots in Cat&reg; Product Link Web {7606} Unable to View Snapshots in Cat&reg; Product Link Web {7606}
Certain Cat&reg; Product Link Device Equipment Data Is Not Updated and May Cause Subscription Issue {7606} Certain Cat&reg; Product Link Device Equipment Data Is Not Updated and May Cause Subscription Issue {7606}
New Monitor Software Is Now Available for Certain Track-Type Tractors and Various Products {7490, 7601, 7603, 7610, 7620} New Monitor Software Is Now Available for Certain Track-Type Tractors and Various Products {7490, 7601, 7603, 7610, 7620}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Water Spray Group - Lines
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Water Spray Group - Lines
Exhaust Gas Valve (NRS) on Certain C7.1 and C6.6 Engines {1082} Exhaust Gas Valve (NRS) on Certain C7.1 and C6.6 Engines {1082}
24 Motor Graders Engine Supplement Water Separator and Fuel Filter (Primary) - Remove and Install
Steering Pin Puller and Tri-Link Support {0599, 0732, 4305} Steering Pin Puller and Tri-Link Support {0599, 0732, 4305}
740 GC Articulated Truck Declaration of Conformity
New Diesel Exhaust Fluid (DEF) Lines are Now Used on Certain Cat&reg; Engines {108U} New Diesel Exhaust Fluid (DEF) Lines are Now Used on Certain Cat&reg; Engines {108U}
New Diesel Exhaust Fluid (DEF) Lines are Now Used on Certain Cat&reg; Machine Engines {108U} New Diesel Exhaust Fluid (DEF) Lines are Now Used on Certain Cat&reg; Machine Engines {108U}
Machine Fluids Recommendation Publications Have Been Updated {0113, 0374, 0645} Machine Fluids Recommendation Publications Have Been Updated {0113, 0374, 0645}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Undercarriage Frame
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Hydraulic Oil Filter
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.