PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Caterpillar

Control Valve

Usage:

PM825 3C6

Bank Valve

Show/hide table




Illustration 1	g06363256

Show/hide table

Table 1
Item	Qty	Part	Specification Description
1	2	446-1393 Control Valve Gp	Installation torque is 42.0 ± 4.2 N·m (30.9 ± 3.1 lb ft).
2	3	446-5512 Nut Kit	Installation torque is 4 to 5 N·m (35 to 44 lb in).
3	2	483-4604 Solenoid Valve Gp	Installation torque is 42.0 ± 4.2 N·m (30.9 ± 3.1 lb ft).
4	2	493-6699 Relief Valve Gp	Installation torque is 30 ± 3 N·m (266 ± 27 lb in).
5	1	446-5507 Nut Kit	Installation torque is 4 to 5 N·m (35 to 44 lb in).
6	1	483-4605 Solenoid Valve Gp	Installation torque is 42.0 ± 4.2 N·m (30.9 ± 3.1 lb ft).
7	1	515-3089 Solenoid Valve Gp	Installation torque is 42.0 ± 4.2 N·m (30.9 ± 3.1 lb ft).
8	2	446-5509 Nut Kit	Installation torque is 4 to 5 N·m (35 to 44 lb in).
9	1	422-8922 Special Nut	Tighten the nut to 6 ± 1 N·m (53 ± 9 lb in).
10	1	456-1844 Control Valve Gp	Installation torque is 50 ± 5 N·m (37 ± 4 lb ft).
11	1	485-2924 Solenoid Valve Gp	Installation torque is 42 ± 4.2 N·m (31 ± 3.1 lb ft).
12	1	493-6698 Control Valve Gp	Installation torque is 35.0 ± 3.5 N·m (26.0 ± 2.6 lb ft).
13	1	446-1455 Control Valve Gp	Installation torque is 35.0 ± 3.5 N·m (26.0 ± 2.6 lb ft).
14	1	493-6697 Solenoid Valve Gp	Installation torque is 50 ± 5 N·m (37 ± 4 lb ft).
15	1	482-9952 Pressure Reducing Valve	Installation torque is 30 ± 3 N·m (266 ± 27 lb in).
16	2	477-1348 Check Valve Gp	Installation torque is 40 ± 4 N·m (30 ± 3 lb ft).
17	1	504-2906 Solenoid Valve	Installation torque is 35.0 ± 3.5 N·m (26.0 ± 2.6 lb ft).

Show/hide table




Illustration 2	g06363266

Show/hide table

Table 2
Item	Qty	Part	Specification Description
18	1	485-2926 Pressure Reducing Valve	Installation torque is 45.0 ± 4.5 N·m (33.0 ± 3.3 lb ft).
19	1	485-2915 Pressure Reducing Valve	Installation torque is 30 ± 3 N·m (266 ± 266 lb in).

Caterpillar Information System:

Diesel Particulate Filter Maintenance on Certain C2.4, C3.3B, and C3.8 Machine Engines {108F, 7500} Diesel Particulate Filter Maintenance on Certain C2.4, C3.3B, and C3.8 Machine Engines {108F, 7500}

Lockable Hood Latch May Not Open With a New Cat Key on Certain TH3510D, TH357D, and TH408D Telehandlers {7251} Lockable Hood Latch May Not Open With a New Cat Key on Certain TH3510D, TH357D, and TH408D Telehandlers {7251}

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Control Valve and Mounting

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Control Manifold

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Hydraulic Oil Filter

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Undercarriage Frame

Machine Fluids Recommendation Publications Have Been Updated {0113, 0374, 0645} Machine Fluids Recommendation Publications Have Been Updated {0113, 0374, 0645}

New Diesel Exhaust Fluid (DEF) Lines are Now Used on Certain Cat® Machine Engines {108U} New Diesel Exhaust Fluid (DEF) Lines are Now Used on Certain Cat® Machine Engines {108U}

New Diesel Exhaust Fluid (DEF) Lines are Now Used on Certain Cat® Engines {108U} New Diesel Exhaust Fluid (DEF) Lines are Now Used on Certain Cat® Engines {108U}

740 GC Articulated Truck Declaration of Conformity

Steering Pin Puller and Tri-Link Support {0599, 0732, 4305} Steering Pin Puller and Tri-Link Support {0599, 0732, 4305}

24 Motor Graders Engine Supplement Water Separator and Fuel Filter (Primary) - Remove and Install

New Greasable Bearings for the Main Frame and the Swing Cylinder Trunnions Are Now Used on Certain 416F2 and 420F2 Backhoe Loaders {7054} New Greasable Bearings for the Main Frame and the Swing Cylinder Trunnions Are Now Used on Certain 416F2 and 420F2 Backhoe Loaders {7054}

Rework Procedure to Increase Oil Flow in the Final Drive Brake Housing on Certain D6K and PL61 Track-Type Tractors {4050, 4056, 4251, 4267} Rework Procedure to Increase Oil Flow in the Final Drive Brake Housing on Certain D6K and PL61 Track-Type Tractors {4050, 4056, 4251, 4267}

New Control Harness Assembly is Now Used on Certain Cat® Machine Engines {1408} New Control Harness Assembly is Now Used on Certain Cat® Machine Engines {1408}

New Control Harness Assembly is Now Used on Certain Cat® Engines {1408} New Control Harness Assembly is Now Used on Certain Cat® Engines {1408}

793F CMD (Command for Hauling) Off-Highway Truck Declaration of Conformity

Brake Cooling Lines Service Life May Increase on Certain 793D Off-Highway Trucks {4257} Brake Cooling Lines Service Life May Increase on Certain 793D Off-Highway Trucks {4257}

An Improved Duo Cone Seal is Available for Certain 793 Off-Highway Trucks Equipped with Standard Wheels {4006, 4201, 4251} An Improved Duo Cone Seal is Available for Certain 793 Off-Highway Trucks Equipped with Standard Wheels {4006, 4201, 4251}

New Transmission Software is Available for Certain PM820, PM822, and PM825 Cold Planers {4800, 4808, 7610, 7620} New Transmission Software is Available for Certain PM820, PM822, and PM825 Cold Planers {4800, 4808, 7610, 7620}

Superstructure Wiring Group and Retention is Improved on Certain 794 AC Off-Highway Trucks {1408} Superstructure Wiring Group and Retention is Improved on Certain 794 AC Off-Highway Trucks {1408}

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Control Manifold

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Pump Rotating (Hydraulic Fan)

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Lines (Hydraulic Fan)