C15 and C18 Generator Set Engines Caterpillar


Fuel Filter Base - Remove

Usage:

C18 T34

Removal Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
185-3630  Strap Wrench 


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.

Dispose of all fluids according to local regulations and mandates.



NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.


  1. Turn the fuel supply to the “OFF” position.


    Illustration 1g06349966

  2. Disconnect harness assemblies (1) and (2).


    Illustration 2g06349969

  3. Disconnect hose assemblies (3), (4), and (5).


    Illustration 3g06349976

  4. Use Tooling (A) to remove fuel filter (6).


    Illustration 4g06349979

  5. Remove bolts (7).

  6. Remove fuel filter base (8).

Caterpillar Information System:

C15 and C18 Generator Set Engines Fuel Priming Pump - Remove and Install
Cat® Detect Object Detection, Gen III System, Touch Screen Product Information
Cat® Detect Object Detection, Gen III System, Touch Screen Regulatory Compliance
New Password Is Now Used for Diagnostic Software on Certain CAT Utility Vehicles {0769, 7000, 7490, 7610, 7620} New Password Is Now Used for Diagnostic Software on Certain CAT Utility Vehicles {0769, 7000, 7490, 7610, 7620}
Cat® Detect Object Detection, Gen III System, Touch Screen Declaration of Conformity
The Return Hose Assembly May Fail on Certain 700 Series Articulated Trucks {5057} The Return Hose Assembly May Fail on Certain 700 Series Articulated Trucks {5057}
Procedure to Install High-Pressure Fuel Pump on Certain 793F Off-Highway Truck Engines {1255, 1256} Procedure to Install High-Pressure Fuel Pump on Certain 793F Off-Highway Truck Engines {1255, 1256}
A New Cylinder Liner is Now Available in All C18 and C32 Engines {1216} A New Cylinder Liner is Now Available in All C18 and C32 Engines {1216}
Sensor Cover May Crack on Certain 700 Series Articulated Trucks {1408} Sensor Cover May Crack on Certain 700 Series Articulated Trucks {1408}
Recommended Driveshaft Inspection and Maintenance Improves Driveshaft Service Life on Certain 797 and 797B Off-Highway Trucks {3108, 3251, 3253} Recommended Driveshaft Inspection and Maintenance Improves Driveshaft Service Life on Certain 797 and 797B Off-Highway Trucks {3108, 3251, 3253}
C175 Tier 4 Final Engines for Caterpillar Built Machines Control Cabinet - Assemble
C2.6 and C3.3B Engines for Caterpillar Built Machines Fuel Injector - Test
C15 and C18 Generator Set Engines Fuel Filter Base - Install
C15 and C18 Generator Set Engines Fuel Filter Base - Assemble
C15 and C18 Generator Set Engines Fuel Filter Base - Disassemble
New Padlocks Are Now Available On Certain TH3510D, TH357D, and TH408DTelehandlers {7315, 7430} New Padlocks Are Now Available On Certain TH3510D, TH357D, and TH408DTelehandlers {7315, 7430}
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Machine Systems Piston Motor (Hydraulic Fan) - Remove and Install - Reversing
An Improved Internal Handrail Is Now Used On Certain TH314D, TH414C, TH417C, and TH417D Telehandlers {7308} An Improved Internal Handrail Is Now Used On Certain TH314D, TH414C, TH417C, and TH417D Telehandlers {7308}
CB64B, CB66B and CB68B Asphalt Compactors Machine Systems Engine Idle Shutdown - Adjust
A New AWD Front Axle Rim Can Now be Installed on Certain F and F2 series Backhoe Loaders {4201, 4202, 4203, 4208, 4209} A New AWD Front Axle Rim Can Now be Installed on Certain F and F2 series Backhoe Loaders {4201, 4202, 4203, 4208, 4209}
Cab Door May Move Out of Adjustment on Certain Motor Graders {7308} Cab Door May Move Out of Adjustment on Certain Motor Graders {7308}
Improved Check Valve for the Water Spray Group Is Now used on Certain CB14B Compactors {5612} Improved Check Valve for the Water Spray Group Is Now used on Certain CB14B Compactors {5612}
24 Motor Grader Machine Systems Front Frame from Rear Frame (Articulating Hitch) - Separate
24 Motor Grader Machine Systems Front Frame to Rear Frame (Articulating Hitch) - Connect
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.