Fuel Filter Base - Disassemble
Start By:
- Remove the fuel temperature sensor. Refer to Disassembly and Assembly, "Fuel Temperature Sensor - Remove and Install".
- Remove the fuel pressure sensor. Refer to Disassembly and Assembly, "Fuel Pressure Sensor - Remove and Install".
- Remove the fuel filter base. Refer to Disassembly and Assembly, "Fuel Filter Base - Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove fuel bypass valve (1) from fuel filter base assembly.
- Remove O-ring seals (2) and (3) from fuel bypass valve (1).
Show/hide table
Illustration 2 g06350288 - Remove dust cap (4) and straight adapter (5).
- Remove O-ring seal (6) from straight adapter (5).
Show/hide table
Illustration 3 g06350301 - Remove elbow adapter (7) and O-ring seal (8).
- Remove cap (12) from check valve (10).
- Remove O-ring seals (9) and (11) from check valve (10).
Show/hide table
Illustration 4 g06350357 - Remove straight adapter (14) and elbow adapter (16).
- Remove O-ring seal (13) from straight adapter (14).
- Remove O-ring seal (15) from elbow adapter (16).
Show/hide table
Illustration 5 g06350368 - Remove check valve (17).
- Remove O-ring seals (18) and (19) from check valve (17).
Show/hide table
Illustration 6 g06350369 - Remove stud (20).
- Remove check valve (23).
- Remove O-ring seals (21) and (22) from check valve (23).
Show/hide table
Illustration 1 | g06350343 |
Caterpillar Information System:
C15 and C18 Generator Set Engines Fuel Filter Base - Assemble
C15 and C18 Generator Set Engines Fuel Filter Base - Install
C15 and C18 Generator Set Engines Fuel Filter Base - Remove
C15 and C18 Generator Set Engines Fuel Priming Pump - Remove and Install
Cat® Detect Object Detection, Gen III System, Touch Screen Product Information
Cat® Detect Object Detection, Gen III System, Touch Screen Regulatory Compliance
New Password Is Now Used for Diagnostic Software on Certain CAT Utility Vehicles {0769, 7000, 7490, 7610, 7620} New Password Is Now Used for Diagnostic Software on Certain CAT Utility Vehicles {0769, 7000, 7490, 7610, 7620}
Cat® Detect Object Detection, Gen III System, Touch Screen Declaration of Conformity
The Return Hose Assembly May Fail on Certain 700 Series Articulated Trucks {5057} The Return Hose Assembly May Fail on Certain 700 Series Articulated Trucks {5057}
Procedure to Install High-Pressure Fuel Pump on Certain 793F Off-Highway Truck Engines {1255, 1256} Procedure to Install High-Pressure Fuel Pump on Certain 793F Off-Highway Truck Engines {1255, 1256}
A New Cylinder Liner is Now Available in All C18 and C32 Engines {1216} A New Cylinder Liner is Now Available in All C18 and C32 Engines {1216}
Sensor Cover May Crack on Certain 700 Series Articulated Trucks {1408} Sensor Cover May Crack on Certain 700 Series Articulated Trucks {1408}
New Padlocks Are Now Available On Certain TH3510D, TH357D, and TH408DTelehandlers {7315, 7430} New Padlocks Are Now Available On Certain TH3510D, TH357D, and TH408DTelehandlers {7315, 7430}
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Machine Systems Piston Motor (Hydraulic Fan) - Remove and Install - Reversing
An Improved Internal Handrail Is Now Used On Certain TH314D, TH414C, TH417C, and TH417D Telehandlers {7308} An Improved Internal Handrail Is Now Used On Certain TH314D, TH414C, TH417C, and TH417D Telehandlers {7308}
CB64B, CB66B and CB68B Asphalt Compactors Machine Systems Engine Idle Shutdown - Adjust
A New AWD Front Axle Rim Can Now be Installed on Certain F and F2 series Backhoe Loaders {4201, 4202, 4203, 4208, 4209} A New AWD Front Axle Rim Can Now be Installed on Certain F and F2 series Backhoe Loaders {4201, 4202, 4203, 4208, 4209}
Cab Door May Move Out of Adjustment on Certain Motor Graders {7308} Cab Door May Move Out of Adjustment on Certain Motor Graders {7308}
Improved Check Valve for the Water Spray Group Is Now used on Certain CB14B Compactors {5612} Improved Check Valve for the Water Spray Group Is Now used on Certain CB14B Compactors {5612}
24 Motor Grader Machine Systems Front Frame from Rear Frame (Articulating Hitch) - Separate
24 Motor Grader Machine Systems Front Frame to Rear Frame (Articulating Hitch) - Connect
Procedure to Install Auto-Lube Kit on Certain Off Highway Trucks {7540} Procedure to Install Auto-Lube Kit on Certain Off Highway Trucks {7540}
® for Dozing, Semi-Autonomous Tractor System (SATS) Safety Messages
® for Dozing, Semi-Autonomous Tractor System (SATS) Maintenance Interval Schedule