Atmospheric Pressure Sensor
Show/hide table
| |
| Illustration 1 | g06088946 |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| 1 | 1 | 320-3063 Pressure Sensor Gp | Torque to |
| - | - | - | Operating voltage is 5.00 ± 0.25 VDC. |
| - | - | - | Operating temperature is |
Caterpillar Information System:
C27 Tier 4 Final Engines For Motorgraders Sound Suppression Cover
C27 Tier 4 Final Engines For Motorgraders Compression Brake
C27 Tier 4 Final Engines For Motorgraders Temperature Sensor (NOx Reduction System)
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Cooling Fan Speed - Test
Cat® Command for Dozing, Operator Station Emerging Symptom Information
Engine Harness Assembly May Fail on Certain TL642D and TL943D Telehandlers {1403, 1408} Engine Harness Assembly May Fail on Certain TL642D and TL943D Telehandlers {1403, 1408}
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Sensor Signal (PWM) - Test
994K Wheel Loader Engine Supplement Clean Emissions Module - Remove and Install
A New Procedure to Replace the Steering Pin on Certain AP355F Asphalt Pavers Is Now Used {4300, 4304, 4309, 4338, 4343} A New Procedure to Replace the Steering Pin on Certain AP355F Asphalt Pavers Is Now Used {4300, 4304, 4309, 4338, 4343}
Procedure to Replace the Steering Pin on Certain AP355F Asphalt Pavers {4300, 4304, 4309, 4338, 4343} Procedure to Replace the Steering Pin on Certain AP355F Asphalt Pavers {4300, 4304, 4309, 4338, 4343}
A New Procedure to Replace the Steering Pin on Certain AP300F Asphalt Pavers Is Now Used {4300, 4304, 4309, 4338, 4343} A New Procedure to Replace the Steering Pin on Certain AP300F Asphalt Pavers Is Now Used {4300, 4304, 4309, 4338, 4343}
Procedure to Replace the Steering Pin on Certain AP300F Asphalt Pavers {4300, 4304, 4309, 4338, 4343} Procedure to Replace the Steering Pin on Certain AP300F Asphalt Pavers {4300, 4304, 4309, 4338, 4343}
C9.3B Engines Inlet Manifold Air Pressure Sensor
Improved A/C Compressor Is Now Available on Certain Large Wheel Loaders and Large Wheel Dozers {1802} Improved A/C Compressor Is Now Available on Certain Large Wheel Loaders and Large Wheel Dozers {1802}
826K Landfill Compactor Prepare the Machine for Maintenance
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Oil Level Is Low
G3512 Gas Engine Electric Starting Motor
785C Off-Highway Trucks Equipped with Dynamic Gas Blending (DGB) Welding on Machines and Engines with Electronic Controls
C175 Tier 4 Final Engines for Caterpillar Built Machines Fuel Pump (High Pressure) - Remove and Install
A Lanyard to Secure Operation and Maintenance Manual Is Now Used on Certain 740 EJ and 745 Articulated Trucks {0374, 7312} A Lanyard to Secure Operation and Maintenance Manual Is Now Used on Certain 740 EJ and 745 Articulated Trucks {0374, 7312}
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Final Drive Oil (Rear) - Change
3516E Engines for Caterpillar Built Machines Solenoid Valve (DEF Heater Coolant) - Remove and Install
An Improved Oil Level Gauge Assembly (Dipstick) Is Now Used on Certain 950K, 950L, 950M, 962K, 962L, and 962M Medium Wheel Loaders {1326} An Improved Oil Level Gauge Assembly (Dipstick) Is Now Used on Certain 950K, 950L, 950M, 962K, 962L, and 962M Medium Wheel Loaders {1326}
New Work Tool Hose Installation Method Is Now Used on Certain Skid Steer Loaders {5057} New Work Tool Hose Installation Method Is Now Used on Certain Skid Steer Loaders {5057}