Solenoid Valve (DEF Heater Coolant) - Remove and Install
- Disconnect harness (1), hose (3), and hose (4).
- Remove bolts (2) and solenoid valve (2).
Show/hide table
Illustration 1 | g06310018 |
Note: Clamp hoses to prevent coolant leakage.
- Install solenoid valve (2) in the reverse order of removal.
Caterpillar Information System:
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Final Drive Oil (Rear) - Change
A Lanyard to Secure Operation and Maintenance Manual Is Now Used on Certain 740 EJ and 745 Articulated Trucks {0374, 7312} A Lanyard to Secure Operation and Maintenance Manual Is Now Used on Certain 740 EJ and 745 Articulated Trucks {0374, 7312}
C175 Tier 4 Final Engines for Caterpillar Built Machines Fuel Pump (High Pressure) - Remove and Install
785C Off-Highway Trucks Equipped with Dynamic Gas Blending (DGB) Welding on Machines and Engines with Electronic Controls
G3512 Gas Engine Electric Starting Motor
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Oil Level Is Low
826K Landfill Compactor Prepare the Machine for Maintenance
Improved A/C Compressor Is Now Available on Certain Large Wheel Loaders and Large Wheel Dozers {1802} Improved A/C Compressor Is Now Available on Certain Large Wheel Loaders and Large Wheel Dozers {1802}
C9.3B Engines Inlet Manifold Air Pressure Sensor
C9.3B Engines Atmospheric Pressure Sensor
C27 Tier 4 Final Engines For Motorgraders Sound Suppression Cover
C27 Tier 4 Final Engines For Motorgraders Compression Brake
An Improved Oil Level Gauge Assembly (Dipstick) Is Now Used on Certain 950K, 950L, 950M, 962K, 962L, and 962M Medium Wheel Loaders {1326} An Improved Oil Level Gauge Assembly (Dipstick) Is Now Used on Certain 950K, 950L, 950M, 962K, 962L, and 962M Medium Wheel Loaders {1326}
New Work Tool Hose Installation Method Is Now Used on Certain Skid Steer Loaders {5057} New Work Tool Hose Installation Method Is Now Used on Certain Skid Steer Loaders {5057}
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Turbocharger
24 Motor Grader Systems Oil Filter (Hydraulic Return)
A Hose Clamp May Fail in the Heater Lines Group on Certain 770G, 772G, 773G, 775G, and 777G Off-Highway Trucks {1380, 1808, 1812, 7304} A Hose Clamp May Fail in the Heater Lines Group on Certain 770G, 772G, 773G, 775G, and 777G Off-Highway Trucks {1380, 1808, 1812, 7304}
The Heater Control Group in the Air Conditioning Group May Fail on Certain 773E and 777E Off-Highway Trucks {7304} The Heater Control Group in the Air Conditioning Group May Fail on Certain 773E and 777E Off-Highway Trucks {7304}
Check the Lower ROPS Mount on R2900G and R3000H Load Haul Dump Machines {7266} Check the Lower ROPS Mount on R2900G and R3000H Load Haul Dump Machines {7266}
Snow Push and Plows Work Tool Supplement Plate Locations and Film Locations
Snow Push and Plows Work Tool Supplement Side Plate Skid Plate - Inspect/Replace
2D GRADE System for 24 Next Gen Motor Graders Electrical Power Supply - Test
Snow Push and Plows Work Tool Supplement Springs - Inspect/Replace
C9.3 Engine for Caterpillar Built Machines Fuel Transfer Pump