Final Drive Oil (Rear) - Change
Show/hide table
Ilustrasi 1 | g01200973 |
- Posisikan sumbat pengisian/kuras oli pada bagian dasar. Lepaskan sumbat pengisian/kuras oli dan kuras oli ke dalam wadah yang sesuai.
Show/hide table
Ilustrasi 2 g01200981 - Posisikan lubang sumbat pada posisi horizontal. Gunakan saluran pada final drive sebagai referensi.
- Tambahkan oli hingga oli rata dengan ulir sumbat. Untuk oli, rujuk ke Buku Petunjuk Pengoperasian dan Perawatan, "Spesifikasi Pelumas" dan Buku Petunjuk Pengoperasian dan Perawatan, "Kapasitas (Pengisian Ulang)".
- Bersihkan sumbat dan pasang kembali sumbat.
- Ulangi prosedur untuk final drive lainnya.
Caterpillar Information System:
A Lanyard to Secure Operation and Maintenance Manual Is Now Used on Certain 740 EJ and 745 Articulated Trucks {0374, 7312} A Lanyard to Secure Operation and Maintenance Manual Is Now Used on Certain 740 EJ and 745 Articulated Trucks {0374, 7312}
C175 Tier 4 Final Engines for Caterpillar Built Machines Fuel Pump (High Pressure) - Remove and Install
785C Off-Highway Trucks Equipped with Dynamic Gas Blending (DGB) Welding on Machines and Engines with Electronic Controls
G3512 Gas Engine Electric Starting Motor
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Oil Level Is Low
826K Landfill Compactor Prepare the Machine for Maintenance
Improved A/C Compressor Is Now Available on Certain Large Wheel Loaders and Large Wheel Dozers {1802} Improved A/C Compressor Is Now Available on Certain Large Wheel Loaders and Large Wheel Dozers {1802}
C9.3B Engines Inlet Manifold Air Pressure Sensor
C9.3B Engines Atmospheric Pressure Sensor
C27 Tier 4 Final Engines For Motorgraders Sound Suppression Cover
C27 Tier 4 Final Engines For Motorgraders Compression Brake
C27 Tier 4 Final Engines For Motorgraders Temperature Sensor (NOx Reduction System)
3516E Engines for Caterpillar Built Machines Solenoid Valve (DEF Heater Coolant) - Remove and Install
An Improved Oil Level Gauge Assembly (Dipstick) Is Now Used on Certain 950K, 950L, 950M, 962K, 962L, and 962M Medium Wheel Loaders {1326} An Improved Oil Level Gauge Assembly (Dipstick) Is Now Used on Certain 950K, 950L, 950M, 962K, 962L, and 962M Medium Wheel Loaders {1326}
New Work Tool Hose Installation Method Is Now Used on Certain Skid Steer Loaders {5057} New Work Tool Hose Installation Method Is Now Used on Certain Skid Steer Loaders {5057}
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Turbocharger
24 Motor Grader Systems Oil Filter (Hydraulic Return)
A Hose Clamp May Fail in the Heater Lines Group on Certain 770G, 772G, 773G, 775G, and 777G Off-Highway Trucks {1380, 1808, 1812, 7304} A Hose Clamp May Fail in the Heater Lines Group on Certain 770G, 772G, 773G, 775G, and 777G Off-Highway Trucks {1380, 1808, 1812, 7304}
The Heater Control Group in the Air Conditioning Group May Fail on Certain 773E and 777E Off-Highway Trucks {7304} The Heater Control Group in the Air Conditioning Group May Fail on Certain 773E and 777E Off-Highway Trucks {7304}
Check the Lower ROPS Mount on R2900G and R3000H Load Haul Dump Machines {7266} Check the Lower ROPS Mount on R2900G and R3000H Load Haul Dump Machines {7266}
Snow Push and Plows Work Tool Supplement Plate Locations and Film Locations
Snow Push and Plows Work Tool Supplement Side Plate Skid Plate - Inspect/Replace
2D GRADE System for 24 Next Gen Motor Graders Electrical Power Supply - Test
Snow Push and Plows Work Tool Supplement Springs - Inspect/Replace