Pump Drive (Rear) - Disassemble
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" M0066576.
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 422-2353 | Stand | 2 |
| B | 154-6182 | Forcing Bolt | 2 |
| C | 1P-0510 | Driver Gp | 1 |
| 8B-7554 | Bearing Cup Puller Gp | 1 | |
| 5F-7345 | Screw | 1 | |
| 7S-7786 | Puller Leg | 1 | |
| D | 1P-0520 | Driver Gp | 1 |
| 8B-7548 | Push-Puller Tool Gp | 1 | |
| 5F-7343 | Bearing Puller Gp | 1 | |
| E | 439-3939 | Link Bracket | 1 |
| F | 1P-0520 | Driver Gp | 1 |
| 1H-3107 | Push-Puller Tool Gp | 1 | |
| 5F-7343 | Bearing Puller Gp | 1 | |
| G | 439-3940 | Link Bracket | 2 |
| H | 1P-0520 | Driver Gp | 1 |
| 1H-3107 | Push-Puller Tool Gp | 1 | |
| 1H-3110 | Bearing Puller Gp | 1 | |
Start By:
a. Separate the rear pump drive from the engine.
Show/hide table
| |
| Illustration 1 | g06282768 |
Show/hide table
| |
| Illustration 2 | g06283224 |
Show/hide table
| |
| Illustration 3 | g06283225 |
Show/hide table
| |
| Illustration 4 | g06283226 |
Show/hide table
| |
| Illustration 5 | g06283227 |
Show/hide table
| |
| Illustration 6 | g06283228 |
Show/hide table
| |
| Illustration 7 | g06283229 |
Show/hide table
| |
| Illustration 8 | g06283230 |
Show/hide table
| |
| Illustration 9 | g06283231 |
Show/hide table
| |
| Illustration 10 | g06283232 |
|
Repeat step 10 to remove the other side bearing cone. | |
Show/hide table
| |
| Illustration 11 | g06283234 |
Show/hide table
| |
| Illustration 12 | g06283235 |
Show/hide table
| |
| Illustration 13 | g06283237 |
Show/hide table
| |
| Illustration 14 | g06283238 |
Show/hide table
| |
| Illustration 15 | g06283239 |
Show/hide table
| |
| Illustration 16 | g06283240 |
Show/hide table
| |
| Illustration 17 | g06283241 |
|
Repeat step 17 to remove the other side of the bearing cone. | |
Show/hide table
| |
| Illustration 18 | g06283242 |
Show/hide table
| |
| Illustration 19 | g06283243 |
|
Remove O-ring seals. | |
Show/hide table
| |
| Illustration 20 | g06283244 |
|
Remove O-ring seals. | |
Show/hide table
| |
| Illustration 21 | g06283245 |
Show/hide table
| |
| Illustration 22 | g06283247 |
Show/hide table
| |
| Illustration 23 | g06283248 |
Show/hide table
| |
| Illustration 24 | g06283249 |
|
Remove O-ring seal. | |
Show/hide table
| |
| Illustration 25 | g06283250 |
|
Remove O-ring seal. | |
Show/hide table
| |
| Illustration 26 | g06283251 |
Show/hide table
| |
| Illustration 27 | g06283252 |
Show/hide table
| |
| Illustration 28 | g06283253 |
Show/hide table
| |
| Illustration 29 | g06283254 |
Show/hide table
| |
| Illustration 30 | g06283255 |
Show/hide table
| |
| Illustration 31 | g06283256 |
Show/hide table
| |
| Illustration 32 | g06283257 |
Show/hide table
| |
| Illustration 33 | g06283258 |
Show/hide table
| |
| Illustration 34 | g06283259 |
Show/hide table
| |
| Illustration 35 | g06283260 |
Show/hide table
| |
| Illustration 36 | g06283261 |
|
Remove O-ring seal. | |
Show/hide table
| |
| Illustration 37 | g06283262 |
Show/hide table
| |
| Illustration 38 | g06283263 |
Show/hide table
| |
| Illustration 39 | g06283264 |
Show/hide table
| |
| Illustration 40 | g06283265 |
Show/hide table
| |
| Illustration 41 | g06283266 |
Show/hide table
| |
| Illustration 42 | g06283267 |
Show/hide table
| |
| Illustration 43 | g06283268 |
|
Repeat step 43 to remove the other side of the bearing cone. | |
Show/hide table
| |
| Illustration 44 | g06283272 |
Show/hide table
| |
| Illustration 45 | g06283269 |
Show/hide table
| |
| Illustration 46 | g06283270 |
Show/hide table
| |
| Illustration 47 | g06283271 |
Caterpillar Information System:
Procedure to Improve the Coupling Adapter Group on Certain 795F AC and 795F XQ Off-Highway Trucks {3252, 4456} Procedure to Improve the Coupling Adapter Group on Certain 795F AC and 795F XQ Off-Highway Trucks {3252, 4456}
785G Off-Highway Truck Machines Systems Communication Electronic Control Module - Remove and Install
CB13, CB15, and CB16 Asphalt Compactors Machine Systems Hydraulic Cylinder (Steering) - Remove and Install
CB13, CB15, and CB16 Asphalt Compactors Machine Systems Water Tank - Remove and Install
Installation Guide for Cat® Terrain for Drilling on the MD6250 Rotary Drill {7490, 7605} Installation Guide for Cat® Terrain for Drilling on the MD6250 Rotary Drill {7490, 7605}
785G Off-Highway Truck Power Train Axle Housing and Support - Remove and Install
CB13, CB15, and CB16 Asphalt Compactors Machine Systems Water Filter - Remove and Install
CB13, CB15, and CB16 Asphalt Compactors Machine Systems Water Spray Pump - Remove and Install
CB13, CB15, and CB16 Asphalt Compactors Machine Systems Spray Bar - Remove and Install
986K Large Wheel Loader Systems Torque Converter Stall (3FWD) - Test
CB13, CB15, and CB16 Asphalt Compactors Machine Systems System Pressure - Release
785G Off-Highway Truck Machines Systems Regulator (Electric Window) - Remove and Install
Unable to Subscribe Certain Cat ® Product Link Equipped G-Series Wheel Tractor Scrapers to Advanced Productivity Feature {7490, 7601, 7606, 7610, 7620} Unable to Subscribe Certain Cat ® Product Link Equipped G-Series Wheel Tractor Scrapers to Advanced Productivity Feature {7490, 7601, 7606, 7610, 7620}
Unable to Register the Product ID for Certain Cat ® Product Link Devices Through Dealer Service Portal {7606} Unable to Register the Product ID for Certain Cat ® Product Link Devices Through Dealer Service Portal {7606}
785G Off-Highway Truck Machines Systems Electronic Control Module - Remove and Install - Ethernet Switch
24 Motor Graders Engine Supplement Engine and Torque Converter - Separate
24 Motor Graders Engine Supplement Engine and Torque Converter - Connect
A New Flange and Ring are Used on the Engine Oil Filter Supply Tube on Certain 3500 Machine Engines {1307} A New Flange and Ring are Used on the Engine Oil Filter Supply Tube on Certain 3500 Machine Engines {1307}
A New Location for Pressure Switch Is Now Available on CS/CP-533E Soil Compactors {1802} A New Location for Pressure Switch Is Now Available on CS/CP-533E Soil Compactors {1802}
An Improved Walkway Gp Is Now Available for Certain Asphalt Screeds {7255} An Improved Walkway Gp Is Now Available for Certain Asphalt Screeds {7255}
Check the ROPS Cab Mount on Certain R1600H and R1700G Load Haul Dump Machines {7266, 7301} Check the ROPS Cab Mount on Certain R1600H and R1700G Load Haul Dump Machines {7266, 7301}
M0091691 (M0083629): 797 Final Drive Axle Installation and Removal Tooling {0374, 0599, 0700, 0722, 0727, 3259, 3282, 4050} M0091691 (M0083629): 797 Final Drive Axle Installation and Removal Tooling {0374, 0599, 0700, 0722, 0727, 3259, 3282, 4050}
A Scab Plate for Bucket Assembly Is Now Available for Certain Skid Steer Loaders and Compact Track Loaders {6101} A Scab Plate for Bucket Assembly Is Now Available for Certain Skid Steer Loaders and Compact Track Loaders {6101}
994K Wheel Loader Power Train Pump Drive (Rear) - Assemble