- Excavator
- 5130 (S/N: 7TJ1-UP; 5ZL1-UP)
- 5130B (S/N: 4CS1-UP)
- 5230 (S/N: 7LL1-UP)
- 5230B (S/N: 4HZ1-UP)
- 5130B (S/N: 4CS1-UP)
- Off-Highway Truck/Tractor
- 776B (S/N: 6JC1-UP)
- 776C (S/N: 2TK1-UP)
- 776D (S/N: 5ER1-UP; AFS1-UP)
- 777 (S/N: 84A1-UP)
- 777B (S/N: 4YC1-UP)
- 777C (S/N: 4XJ1-UP)
- 777D (S/N: FKR1-UP; 3PR1-UP; 2YW1-UP)
- 784C (S/N: 2PZ1-UP)
- 785 (S/N: 8GB1-UP)
- 785B (S/N: 6HK1-UP)
- 785C (S/N: 1HW1-UP; APX1-UP; 5AZ1-UP)
- 785D (S/N: DMC1-UP; MSY1-UP)
- 789 (S/N: 9ZC1-UP)
- 789C (S/N: 2BW1-UP)
- 789D (S/N: SPD1-UP; SHH1-UP)
- 793 (S/N: 3SJ1-UP)
- 793B (S/N: 1HL1-UP)
- 793C (S/N: CBR1-UP; 4AR1-UP; ATY1-UP; 4GZ1-UP)
- 793D (S/N: FDB1-UP)
- 797 (S/N: 5YW1-UP)
- 797B (S/N: JSM1-UP)
- 776C (S/N: 2TK1-UP)
- Wheel Loader
- 994 (S/N: 9YF1-UP)
- 994D (S/N: 3TZ1-UP)
- 994F (S/N: 4421-UP)
- 994H (S/N: DWC1-UP)
- 994D (S/N: 3TZ1-UP)
Description Of Change: The new flange and ring limit the tube motion during normal engine operation. The improved joint creates a more secure connection to the engine oil block.
Adaptable To: The new 361-7097 Ring and 361-7098 Flange replace the former 8N-1991 Retaining Ring and 8N-1992 Retainer.
The parts listed below are adaptable back to first production of the engines listed above. Refer to Table 2 for the new part numbers.
The effective serial numbers are listed in Table 1.
Effectivity |
---|
S/N:5ZL00125-UP |
S/N:7TJ00002-UP |
S/N:4CS00219-UP |
S/N:7LL00106-UP |
S/N:4HZ00237-UP |
S/N:6JC00109-UP |
S/N:2TK00115-UP |
S/N:5ER00128-UP |
S/N:AFS00101-UP |
S/N:84A75105-UP |
S/N:4YC78003-UP |
S/N:4XJ78002-UP |
S/N:3PR78005-UP |
S/N:FKR01885-UP |
S/N:2YW00106-UP |
S/N:2PZ00107-UP |
S/N:8GB78009-UP |
S/N:6HK99382-UP |
S/N:1HW00135-UP |
S/N:APX75002-UP |
S/N:5AZ00428-UP |
S/N:MSY00549-UP |
S/N:DMC00156-UP |
S/N:9ZC78003-UP |
S/N:2BW83002-UP |
S/N:SHH00315-UP |
S/N:SPD00415-UP |
S/N:3SJ75002-UP |
S/N:1HL78008-UP |
S/N:4AR77003-UP |
S/N:4GZ00002-UP |
S/N:ATY01125-UP |
S/N:CBR00109-UP |
S/N:FDB01704-UP |
S/N:5YW00278-UP |
S/N:JSM00489-UP |
S/N:9YF77002-UP |
S/N:3TZ00381-UP |
S/N:44200341-UP |
S/N:DWC00358-UP |
S/N:SE401716-UP |
Rework Procedure
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility. |
Qty | New Pt. No. | Former Pt. No. |
---|---|---|
2 | 165-3931 Bolt | 0S-1571 Bolt 0S-1594 Bolt |
1 | 361-7097 Ring | 8N-1991 Retaining Ring |
1 | 361-7098 Flange | 8N-1992 Retainer |
- Remove bolts (1), (4), and (5). Bolts (4) and (5) and washers (2) will be reused.
- Remove the tube.
Show/hide table
Illustration 2 g03289321 (2) 5M-2894 Hard Washer
(3)8N-1992 Retainer
(4)0L-1351 Bolt
(5)165-3931 Bolt
(6)361-7098 Flange
(7)361-7097 Ring - Install one ring (7) and flange (6) onto the tube.
- Attach the tube to the oil block using two bolts (5) and washers (2). Attach the opposite end of the tube to the oil filter housing using the previously removed hardware.
- Install bolts (4).
Illustration 1 | g03289320 |
(1) (2) (3) (4) (5) |