Check the ROPS Cab Mount on Certain R1600H and R1700G Load Haul Dump Machines {7266, 7301}
- Load Haul Dump
- R1600H (S/N: 9SD1-UP)
- R1700G (S/N: XBR1-UP)
Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.
Problem
Show/hide table
Illustration 1 | g06284984 |
Side of cab ( View through wall and floor plates) (1) Pretension bolt (2) ROPS cab mount |
Field service reports indicate that pretension bolt (1) of lower ROPS cab mount (2) may be loose.
Solution
Caterpillar is aware of the problem but an interim repair has not yet been defined.
Follow the instruction below if you have experienced this problem.
- Submit a Dealer Solution Network (DSN) ticket, quoting CPI issue number 413306
- Request that a Tier 1 representative, transfer your ticket to an available Tier 2 representative for Caterpillar Underground Mining, Base Machine
Caterpillar Information System:
An Improved Walkway Gp Is Now Available for Certain Asphalt Screeds {7255} An Improved Walkway Gp Is Now Available for Certain Asphalt Screeds {7255}
A New Location for Pressure Switch Is Now Available on CS/CP-533E Soil Compactors {1802} A New Location for Pressure Switch Is Now Available on CS/CP-533E Soil Compactors {1802}
A New Flange and Ring are Used on the Engine Oil Filter Supply Tube on Certain 3500 Machine Engines {1307} A New Flange and Ring are Used on the Engine Oil Filter Supply Tube on Certain 3500 Machine Engines {1307}
24 Motor Graders Engine Supplement Engine and Torque Converter - Connect
24 Motor Graders Engine Supplement Engine and Torque Converter - Separate
785G Off-Highway Truck Machines Systems Electronic Control Module - Remove and Install - Ethernet Switch
Unable to Register the Product ID for Certain Cat ® Product Link Devices Through Dealer Service Portal {7606} Unable to Register the Product ID for Certain Cat ® Product Link Devices Through Dealer Service Portal {7606}
Unable to Subscribe Certain Cat ® Product Link Equipped G-Series Wheel Tractor Scrapers to Advanced Productivity Feature {7490, 7601, 7606, 7610, 7620} Unable to Subscribe Certain Cat ® Product Link Equipped G-Series Wheel Tractor Scrapers to Advanced Productivity Feature {7490, 7601, 7606, 7610, 7620}
994K Wheel Loader Power Train Pump Drive (Rear) - Disassemble
Procedure to Improve the Coupling Adapter Group on Certain 795F AC and 795F XQ Off-Highway Trucks {3252, 4456} Procedure to Improve the Coupling Adapter Group on Certain 795F AC and 795F XQ Off-Highway Trucks {3252, 4456}
785G Off-Highway Truck Machines Systems Communication Electronic Control Module - Remove and Install
CB13, CB15, and CB16 Asphalt Compactors Machine Systems Hydraulic Cylinder (Steering) - Remove and Install
M0091691 (M0083629): 797 Final Drive Axle Installation and Removal Tooling {0374, 0599, 0700, 0722, 0727, 3259, 3282, 4050} M0091691 (M0083629): 797 Final Drive Axle Installation and Removal Tooling {0374, 0599, 0700, 0722, 0727, 3259, 3282, 4050}
A Scab Plate for Bucket Assembly Is Now Available for Certain Skid Steer Loaders and Compact Track Loaders {6101} A Scab Plate for Bucket Assembly Is Now Available for Certain Skid Steer Loaders and Compact Track Loaders {6101}
994K Wheel Loader Power Train Pump Drive (Rear) - Assemble
24 Motor Graders Engine Supplement Engine and Torque Converter - Remove and Install
986K Wheel Loader Machine Systems Relief Valve (Torque Converter Outlet) - Remove and Install
Combustion Rings May Fail on Certain C175 Off-Highway Truck Engines {1214, 1439, 1718} Combustion Rings May Fail on Certain C175 Off-Highway Truck Engines {1214, 1439, 1718}
794 AC Off-Highway Truck Field Assembly Tire and Rim - Install
New Head Lamp Moisture Criteria for Certain Material Handlers and Wheeled Excavators {1429} New Head Lamp Moisture Criteria for Certain Material Handlers and Wheeled Excavators {1429}
New Switch in the Seat Group Is Now Used on Certain Compact Track Loaders, Multi Terrain Loaders, and Skid Steer Loaders {7312, 7321, 7324} New Switch in the Seat Group Is Now Used on Certain Compact Track Loaders, Multi Terrain Loaders, and Skid Steer Loaders {7312, 7321, 7324}
Procedure to Rework Lower ROPS Cab Mount on R1600H and R1700G Load Haul Dump Machines {7266, 7301} Procedure to Rework Lower ROPS Cab Mount on R1600H and R1700G Load Haul Dump Machines {7266, 7301}
Procedure to Rework Lower ROPS Cab Mount Now Available for R1600H and R1700G Load Haul Dump Machines {7266, 7301} Procedure to Rework Lower ROPS Cab Mount Now Available for R1600H and R1700G Load Haul Dump Machines {7266, 7301}
B4, B6 and B8 Hydraulic Hammers Disassembly and Assembly Hydraulic Hammer - Disassemble