Fuel Filter Housing - Install
- Position fuel filter housing (8) and install bolts (7).
Show/hide table
Illustration 2 g06130514 - Connect adapter (6).
Show/hide table
Illustration 3 g06130277 - Connect harness assembly (4), hose assembly (3), hose assembly (2), and hose assembly (1).
- Install fuel filters (5).
Show/hide table
| |
| Illustration 1 | g06130524 |
Caterpillar Information System:
New Cab Floor Mat Is Now Used on Certain C-Series Knuckleboom Loaders {7301} New Cab Floor Mat Is Now Used on Certain C-Series Knuckleboom Loaders {7301}
980L Tier 3 Wheel Loader Machine System Main Control Valve - Assemble
Procedure to Replace the 180-5316 Circulating Fan Gp with 5D-2856 Circulating Fan Gp for Certain Excavators and Track Feller Bunchers {1408, 7301, 7316, 7329} Procedure to Replace the 180-5316 Circulating Fan Gp with 5D-2856 Circulating Fan Gp for Certain Excavators and Track Feller Bunchers {1408, 7301, 7316, 7329}
980M Tier 4 and 982M Tier 4 Wheel Loader Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
980L Tier 3 Wheel Loader Machine System Main Control Valve - Disassemble
980L Tier 3 Wheel Loader Machine System Main Control Valve - Remove and Install
980L Tier 3 Wheel Loader Engine Supplement Hood - Remove and Install - One Piece Hood
New Product Link Software Is Now Available on Certain Cat® Product Link Devices When Using R-Terminal Connection {7606, 7610, 7620} New Product Link Software Is Now Available on Certain Cat® Product Link Devices When Using R-Terminal Connection {7606, 7610, 7620}
New Electronic Monitoring System (EMS) Series III Is Now Available on Certain Machines Equipped with Cat® Product Link {7490, 7610, 7620} New Electronic Monitoring System (EMS) Series III Is Now Available on Certain Machines Equipped with Cat® Product Link {7490, 7610, 7620}
980L Tier 3 Wheel Loader Machine System Control Valve (Auxiliary) - Remove and Install
992K Wheel Loader Systems Window Wiper and Wiper Motor
990K Wheel Loader Systems Window Wiper and Wiper Motor
PM820, PM822, and PM825 Cold Planer Machine Systems Side Plate - Remove and Install - Right Hand
797F and 797F XQ Off-Highway Trucks Machine Systems Oil Cooler Core (Brake) - Remove and Install
PM310, PM312, and PM313 Cold Planer Capacities (Refill)
C175-16 and C175-20 Engines for Caterpillar Built Machines Fuel Priming Pump - Remove and Install
PM310, PM312, and PM313 Cold Planer Servicing the Rotor
PM310, PM312, and PM313 Cold Planer Stopping the Machine
Wheeled Excavators and Wheeled Material Handlers Air Conditioning and Heating Cab Pressurization and Filtration System - If Equipped
Reworking and Rerouting the Pre-Heater Exhaust Tube and Insulation Sleeve on Certain 521B and 522B Track Feller Bunchers {1296, 1383, 5096, 7304} Reworking and Rerouting the Pre-Heater Exhaust Tube and Insulation Sleeve on Certain 521B and 522B Track Feller Bunchers {1296, 1383, 5096, 7304}
New Pre-Heater Exhaust Tube Rework Is Now Used on Certain 521B and 522B Track Feller Bunchers {1296, 1383, 5096, 7304} New Pre-Heater Exhaust Tube Rework Is Now Used on Certain 521B and 522B Track Feller Bunchers {1296, 1383, 5096, 7304}
New Lift Cylinder Group Is Now Used on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {5102} New Lift Cylinder Group Is Now Used on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {5102}
Using the FT-3318 Tooling For Piston Motor Assembly on Certain Compact Track Loaders and Multi Terrain Loaders {4351, 5058} Using the FT-3318 Tooling For Piston Motor Assembly on Certain Compact Track Loaders and Multi Terrain Loaders {4351, 5058}
MH3037 Material Handler Engine Supplement Turbocharger - Remove and Install - First Stage Turbocharger