Hood - Remove and Install - One Piece Hood
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 439-3940 | Link Bracket | 3 |
Start By:
- Remove the hood tilt actuators.
- Remove bolts (1) and panel (2).
Show/hide table
Illustration 2 g06130458 - Disconnect harness assembly (3).
Show/hide table
Illustration 3 g06130461 - Remove cover (4).
Show/hide table
Illustration 4 g06130465 Show/hide table
Illustration 5 g06130467 - Remove plugs (5).
Show/hide table
Illustration 6 g06130469 Show/hide table
Illustration 7 g06130472 - Attach Tooling (A) and a suitable lifting device to hood assembly (6). The weight of hood assembly (6) is approximately
407 kg (898 lb) . - Remove pins (7) and hood assembly (6).
Show/hide table
| |
| Illustration 1 | g06130457 |
- Install hood assembly (7) in the reverse order of removal.
Caterpillar Information System:
New Product Link Software Is Now Available on Certain Cat® Product Link Devices When Using R-Terminal Connection {7606, 7610, 7620} New Product Link Software Is Now Available on Certain Cat® Product Link Devices When Using R-Terminal Connection {7606, 7610, 7620}
New Electronic Monitoring System (EMS) Series III Is Now Available on Certain Machines Equipped with Cat® Product Link {7490, 7610, 7620} New Electronic Monitoring System (EMS) Series III Is Now Available on Certain Machines Equipped with Cat® Product Link {7490, 7610, 7620}
980L Tier 3 Wheel Loader Machine System Control Valve (Auxiliary) - Remove and Install
992K Wheel Loader Systems Window Wiper and Wiper Motor
990K Wheel Loader Systems Window Wiper and Wiper Motor
Procedure to Install Ventilation Reduction Package on R1600H Load Haul Dump Machines {1000, 7620} Procedure to Install Ventilation Reduction Package on R1600H Load Haul Dump Machines {1000, 7620}
C175-16 and C175-20 Engines for Caterpillar Built Machines Fuel Filter Housing - Remove
Improved Pipe Assemblies for Coolant Tube are Now Used on Certain 794 AC Off-Highway Trucks {1380} Improved Pipe Assemblies for Coolant Tube are Now Used on Certain 794 AC Off-Highway Trucks {1380}
PM310, PM312, and PM313 Cold Planer Machine Interlocks
MD6200 Rotary Drill Fuel Tank Water and Sediment - Drain
Product Link ® Elite PLE742 Systems Wiring Harness (Short Circuit) - Test
Product Link ® Elite PLE742 Systems Wiring Harness (Open Circuit) - Test
980L Tier 3 Wheel Loader Machine System Main Control Valve - Remove and Install
980L Tier 3 Wheel Loader Machine System Main Control Valve - Disassemble
980M Tier 4 and 982M Tier 4 Wheel Loader Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
Procedure to Replace the 180-5316 Circulating Fan Gp with 5D-2856 Circulating Fan Gp for Certain Excavators and Track Feller Bunchers {1408, 7301, 7316, 7329} Procedure to Replace the 180-5316 Circulating Fan Gp with 5D-2856 Circulating Fan Gp for Certain Excavators and Track Feller Bunchers {1408, 7301, 7316, 7329}
980L Tier 3 Wheel Loader Machine System Main Control Valve - Assemble
New Cab Floor Mat Is Now Used on Certain C-Series Knuckleboom Loaders {7301} New Cab Floor Mat Is Now Used on Certain C-Series Knuckleboom Loaders {7301}
C175-16 and C175-20 Engines for Caterpillar Built Machines Fuel Filter Housing - Install
PM820, PM822, and PM825 Cold Planer Machine Systems Side Plate - Remove and Install - Right Hand
797F and 797F XQ Off-Highway Trucks Machine Systems Oil Cooler Core (Brake) - Remove and Install
PM310, PM312, and PM313 Cold Planer Capacities (Refill)
C175-16 and C175-20 Engines for Caterpillar Built Machines Fuel Priming Pump - Remove and Install
PM310, PM312, and PM313 Cold Planer Servicing the Rotor