New Electronic Monitoring System (EMS) Series III Is Now Available on Certain Machines Equipped with Cat® Product Link {7490, 7610, 7620}
- Machine Control and Guidance Products
- PRODUCT LINK (S/N: PL61-UP)
Reference: Special Instruction, REHS7365, "Updating Certain Cat® Machines from EMS II to EMS III"
New Electronic Monitoring System (EMS) series III is now available on certain machines equipped with Cat® Product Link. The new EMS III is compatible with Product Link PLE601, PL631, and PL641. The new monitoring software is validated for the legacy model machines.
The new part number is listed in Table 1.
Show/hide table
| Qty | Part Number | Description |
|---|---|---|
| 1 | Electronic Control Module (CATERPILLAR MONITORING SYSTEM) |
Refer to the above mentioned reference for more information.
Caterpillar Information System:
980L Tier 3 Wheel Loader Machine System Control Valve (Auxiliary) - Remove and Install
992K Wheel Loader Systems Window Wiper and Wiper Motor
990K Wheel Loader Systems Window Wiper and Wiper Motor
Procedure to Install Ventilation Reduction Package on R1600H Load Haul Dump Machines {1000, 7620} Procedure to Install Ventilation Reduction Package on R1600H Load Haul Dump Machines {1000, 7620}
C175-16 and C175-20 Engines for Caterpillar Built Machines Fuel Filter Housing - Remove
Improved Pipe Assemblies for Coolant Tube are Now Used on Certain 794 AC Off-Highway Trucks {1380} Improved Pipe Assemblies for Coolant Tube are Now Used on Certain 794 AC Off-Highway Trucks {1380}
PM310, PM312, and PM313 Cold Planer Machine Interlocks
MD6200 Rotary Drill Fuel Tank Water and Sediment - Drain
Product Link ® Elite PLE742 Systems Wiring Harness (Short Circuit) - Test
Product Link ® Elite PLE742 Systems Wiring Harness (Open Circuit) - Test
Product Link ® Elite PLE742 Systems Electrical Connector - Inspect
Product Link ® Elite PLE742 Systems ECM - Replace
New Product Link Software Is Now Available on Certain Cat® Product Link Devices When Using R-Terminal Connection {7606, 7610, 7620} New Product Link Software Is Now Available on Certain Cat® Product Link Devices When Using R-Terminal Connection {7606, 7610, 7620}
980L Tier 3 Wheel Loader Engine Supplement Hood - Remove and Install - One Piece Hood
980L Tier 3 Wheel Loader Machine System Main Control Valve - Remove and Install
980L Tier 3 Wheel Loader Machine System Main Control Valve - Disassemble
980M Tier 4 and 982M Tier 4 Wheel Loader Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
Procedure to Replace the 180-5316 Circulating Fan Gp with 5D-2856 Circulating Fan Gp for Certain Excavators and Track Feller Bunchers {1408, 7301, 7316, 7329} Procedure to Replace the 180-5316 Circulating Fan Gp with 5D-2856 Circulating Fan Gp for Certain Excavators and Track Feller Bunchers {1408, 7301, 7316, 7329}
980L Tier 3 Wheel Loader Machine System Main Control Valve - Assemble
New Cab Floor Mat Is Now Used on Certain C-Series Knuckleboom Loaders {7301} New Cab Floor Mat Is Now Used on Certain C-Series Knuckleboom Loaders {7301}
C175-16 and C175-20 Engines for Caterpillar Built Machines Fuel Filter Housing - Install
PM820, PM822, and PM825 Cold Planer Machine Systems Side Plate - Remove and Install - Right Hand
797F and 797F XQ Off-Highway Trucks Machine Systems Oil Cooler Core (Brake) - Remove and Install
PM310, PM312, and PM313 Cold Planer Capacities (Refill)