Inlet Manifold - Remove and Install
Start By:
- Remove the fuel injection manifold.
- Remove the intake air heater.
- Remove the exhaust gas valve.
- Remove bolts (1) and bolts (2). Remove inlet manifold (3) and gasket (4).
Show/hide table
| |
| Illustration 1 | g02858877 |
- Install inlet manifold (3) in the reverse order of removal.
End By:
- Install the exhaust gas valve.
- Install the intake air heater.
- Install the fuel injection lines.
Caterpillar Information System:
CB64B, CB66B and CB68B Asphalt Compactor Machine Systems Gear Pump (Steering)
725C, 725C2, 730C and 730C2 Articulated Truck Systems Location of Components (Hydraulic System)
CB64B, CB66B, and CB68B Propel System Position Sensor
A New Fill Tube Cover for the Diesel Emissions Fluid (DEF) Tank is Now Available for Certain 770G and 772G Off-Highway Trucks {108T} A New Fill Tube Cover for the Diesel Emissions Fluid (DEF) Tank is Now Available for Certain 770G and 772G Off-Highway Trucks {108T}
C3.8 Engines for Caterpillar Built Machines Diesel Particulate Filter - Remove and Install
C3.8 Engines for Caterpillar Built Machines Diesel Particulate Filter - Assemble
CB64B, CB66B, and CB68B Propel System Piston Motor (Drum Propel)
950M, 962M, 950M Z and 962M Z Wheel Loaders Power Train Axle Housing - Assemble
CB64B, CB66B, and CB68B Propel System Brake Pump
MH3037 Material Handler Machine System Specification Boom
CB64B, CB66B and CB68B Asphalt Compactor Machine Systems Lines (Steering)
CB64B, CB66B and CB68B Asphalt Compactor Machine Systems Water Spray Lines
CB64B, CB66B, and CB68B Propel System Joystick Control
Improved Sliding Frame Group is Now Used on Certain 424B and 424BHD Backhoe Loaders {5804, 6508} Improved Sliding Frame Group is Now Used on Certain 424B and 424BHD Backhoe Loaders {5804, 6508}
MH3037 Material Handler Machine System Specification Lift Position Sensor and Mounting
CB64B, CB66B, and CB68B Propel System Joystick Control
797F ECM Configurable Parameters {1901, 4800, 4808, 5701, 7490, 7494, 7601, 7603, 7610, 7620} 797F ECM Configurable Parameters {1901, 4800, 4808, 5701, 7490, 7494, 7601, 7603, 7610, 7620}
A New Single Speed Drive Motor is Used on Certain Skid Steer Loaders {4351, 5058} A New Single Speed Drive Motor is Used on Certain Skid Steer Loaders {4351, 5058}
14M3 Motor Grader Power Train Service Brake (Wheel Spindle) - Remove and Install
C3.8 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
MH3037 Material Handler Machine System Specification Lift Position Sensor and Mounting
C3.8 Engines for Caterpillar Built Machines Engine Oil Pump - Remove and Install
14M3 Motor Grader Power Train Service Brake (Wheel Spindle) - Disassemble
14M Motor Grader Power Train Service Brake (Wheel Spindle) - Assemble