A New Single Speed Drive Motor is Used on Certain Skid Steer Loaders {4351, 5058} Caterpillar


A New Single Speed Drive Motor is Used on Certain Skid Steer Loaders {4351, 5058}

Usage:

236B3 A9H
Skid Steer Loader
236B3 (S/N: A9H1-UP)
246C (S/N: JAY1-UP)
246D (S/N: BYF1-UP; JSL1-UP; HMR1-UP)
252B Series 3 (S/N: TNK1-UP)
256C (S/N: DWS1-UP)
262C (S/N: MST1-UP)
262C2 (S/N: TMW1-UP)
262D (S/N: DTB1-UP; KTS1-UP; LST1-UP)
272C (S/N: RED1-UP)
272D (S/N: GSL1-UP; B5W1-UP)
272D2 (S/N: BL21-UP)

Description Of Change: A new single speed drive motor is now used on certain Skid Steer Loaders. Improvements have been made to the passageway from the brake spring chamber to the case drain port.

Adaptable To:

Table 1
Required Parts 
Item  Qty  New Part Number  Description  Former Part Number 
455-7986(1)  Piston Motor Gp  398-7484 
455-7987(2) Piston Motor Gp  358-5003 
258-2442(3) Piston Motor Gp 258-2442 
258-2605(4) Piston Motor Gp 258-2605 
358-4982(5) Piston Motor Gp 358-4982 
(1) For , 272D, and 272D2 machines.
(2) For 246D and 262D machines.
(3) 236B3, 252B3, 246C, 256C, 262C, and 262C2 machines.. Part number is the same but changes were made and old stock purged.
(4) For 272C machines.. Part number is the same but changes were made and old stock purged.
(5) For 236B3 and 252B3 machines.. Part number is the same but changes were made and old stock purged.
The new motor is adaptable to and effective in production with the machines listed in Table 1.

Table 2
Sales Model  Adaptable to  Effective with 
236B 3  S/N:A9H1-4214  S/N:A9H4215-UP 
246C  S/N:JAY1-9332  S/N:JAY9333-UP 
246D  S/N:BYF1-2838  S/N:BYF2839-UP 
S/N:HMR1-1635 S/N:HMR1636-UP 
S/N:JSL1-452 S/N:JSL453-UP 
252B 3  S/N:TNK1-2529  S/N:TNK2530-UP 
256C  S/N:DWS1-2313  S/N:DWS2314-UP 
262C  S/N:MST1-412  S/N:MST413-UP 
262C 2  S/N:TMW1-1892  S/N:TMW1893-UP 
262D  S/N:DTB1-5121  S/N:DTB5122-UP 
S/N:KTS1-495 S/N:KTS496-UP 
S/N:LST1-482 S/N:LST483-UP 
272C  S/N:RED1-2925  S/N:RED2926-UP 
272D  S/N:B5W1-1261  S/N:B5W1262-UP 
S/N:GSL1-695 S/N:GSL696-UP 
272D 2  S/N:BL21-440  S/N:BL2441-UP 

Caterpillar Information System:

797F ECM Configurable Parameters {1901, 4800, 4808, 5701, 7490, 7494, 7601, 7603, 7610, 7620} 797F ECM Configurable Parameters {1901, 4800, 4808, 5701, 7490, 7494, 7601, 7603, 7610, 7620}
CB64B, CB66B, and CB68B Propel System Joystick Control
MH3037 Material Handler Machine System Specification Lift Position Sensor and Mounting
Improved Sliding Frame Group is Now Used on Certain 424B and 424BHD Backhoe Loaders {5804, 6508} Improved Sliding Frame Group is Now Used on Certain 424B and 424BHD Backhoe Loaders {5804, 6508}
CB64B, CB66B, and CB68B Propel System Joystick Control
C3.8 Engines for Caterpillar Built Machines Inlet Manifold - Remove and Install
CB64B, CB66B and CB68B Asphalt Compactor Machine Systems Gear Pump (Steering)
725C, 725C2, 730C and 730C2 Articulated Truck Systems Location of Components (Hydraulic System)
CB64B, CB66B, and CB68B Propel System Position Sensor
A New Fill Tube Cover for the Diesel Emissions Fluid (DEF) Tank is Now Available for Certain 770G and 772G Off-Highway Trucks {108T} A New Fill Tube Cover for the Diesel Emissions Fluid (DEF) Tank is Now Available for Certain 770G and 772G Off-Highway Trucks {108T}
C3.8 Engines for Caterpillar Built Machines Diesel Particulate Filter - Remove and Install
C3.8 Engines for Caterpillar Built Machines Diesel Particulate Filter - Assemble
14M3 Motor Grader Power Train Service Brake (Wheel Spindle) - Remove and Install
C3.8 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
MH3037 Material Handler Machine System Specification Lift Position Sensor and Mounting
C3.8 Engines for Caterpillar Built Machines Engine Oil Pump - Remove and Install
14M3 Motor Grader Power Train Service Brake (Wheel Spindle) - Disassemble
14M Motor Grader Power Train Service Brake (Wheel Spindle) - Assemble
New Connectors Are Used on Certain C-Series Knuckleboom Loader Stabilizer Lines {5057} New Connectors Are Used on Certain C-Series Knuckleboom Loader Stabilizer Lines {5057}
C3.8 Engines for Caterpillar Built Machines Water Pump - Remove and Install
A New Fuel Cooler System Is Now Available for Certain PM-200 Cold Planers {1274} A New Fuel Cooler System Is Now Available for Certain PM-200 Cold Planers {1274}
Procedure to Install the Fuel Cooler System on certain PM-200 Cold Planers {1712} Procedure to Install the Fuel Cooler System on certain PM-200 Cold Planers {1712}
MH3027 Material Handler C7.1 Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
730C and 730C2 EJECTOR Articulated Truck Systems Calibrations (Cat ET)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.