Service Brake (Wheel Spindle) - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 439-3938 | Link Bracket | 2 |
B | - | Loctite 263 | - |
Start By:
- Remove the wheel and tire (rear).
- Remove the drive chain.
- Remove bolts (1) and guard (2).
Show/hide table
Illustration 2 g06048130 - Disconnect tube assembly (3).
Show/hide table
Illustration 3 g06048154 - Attach Tooling (A) and a suitable lifting device to service brake (wheel spindle) (4). The weight of service brake (wheel spindle) (4) is approximately
272 kg (600 lb) . - Remove bolts (5) and service brake (wheel spindle) (4).
Show/hide table
Illustration 1 | g06048119 |
- Install service brake (wheel spindle) (4) in the reverse order of removal.
- Apply Tooling (B) to the threads of bolts (5).
- Tighten bolts (5) to a torque of
270 ± 40 N·m (199 ± 30 lb ft) .
Caterpillar Information System:
A New Single Speed Drive Motor is Used on Certain Skid Steer Loaders {4351, 5058} A New Single Speed Drive Motor is Used on Certain Skid Steer Loaders {4351, 5058}
797F ECM Configurable Parameters {1901, 4800, 4808, 5701, 7490, 7494, 7601, 7603, 7610, 7620} 797F ECM Configurable Parameters {1901, 4800, 4808, 5701, 7490, 7494, 7601, 7603, 7610, 7620}
CB64B, CB66B, and CB68B Propel System Joystick Control
MH3037 Material Handler Machine System Specification Lift Position Sensor and Mounting
Improved Sliding Frame Group is Now Used on Certain 424B and 424BHD Backhoe Loaders {5804, 6508} Improved Sliding Frame Group is Now Used on Certain 424B and 424BHD Backhoe Loaders {5804, 6508}
CB64B, CB66B, and CB68B Propel System Joystick Control
C3.8 Engines for Caterpillar Built Machines Inlet Manifold - Remove and Install
CB64B, CB66B and CB68B Asphalt Compactor Machine Systems Gear Pump (Steering)
725C, 725C2, 730C and 730C2 Articulated Truck Systems Location of Components (Hydraulic System)
CB64B, CB66B, and CB68B Propel System Position Sensor
A New Fill Tube Cover for the Diesel Emissions Fluid (DEF) Tank is Now Available for Certain 770G and 772G Off-Highway Trucks {108T} A New Fill Tube Cover for the Diesel Emissions Fluid (DEF) Tank is Now Available for Certain 770G and 772G Off-Highway Trucks {108T}
C3.8 Engines for Caterpillar Built Machines Diesel Particulate Filter - Remove and Install
C3.8 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
MH3037 Material Handler Machine System Specification Lift Position Sensor and Mounting
C3.8 Engines for Caterpillar Built Machines Engine Oil Pump - Remove and Install
14M3 Motor Grader Power Train Service Brake (Wheel Spindle) - Disassemble
14M Motor Grader Power Train Service Brake (Wheel Spindle) - Assemble
New Connectors Are Used on Certain C-Series Knuckleboom Loader Stabilizer Lines {5057} New Connectors Are Used on Certain C-Series Knuckleboom Loader Stabilizer Lines {5057}
C3.8 Engines for Caterpillar Built Machines Water Pump - Remove and Install
A New Fuel Cooler System Is Now Available for Certain PM-200 Cold Planers {1274} A New Fuel Cooler System Is Now Available for Certain PM-200 Cold Planers {1274}
Procedure to Install the Fuel Cooler System on certain PM-200 Cold Planers {1712} Procedure to Install the Fuel Cooler System on certain PM-200 Cold Planers {1712}
MH3027 Material Handler C7.1 Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
730C and 730C2 EJECTOR Articulated Truck Systems Calibrations (Cat ET)
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic and Machine Systems Transmission Oil Cooler