Access Door - Remove and Install - Right
Removal Procedure
- Attach a suitable lifting device to door panel (1). The weight of door panel (1) is approximately 57 kg (125 lb).
Show/hide table
 | |
| Illustration 1 | g03674855 |
- Disconnect strut assembly (2) and remove bolts (3). Remove door panel (1) .
Show/hide table
 | |
| Illustration 2 | g03674872 |
Installation Procedure
- Install door panel (1) in the reverse order of removal.
Caterpillar Information System:
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Axle Housing and Flange - Install
2015/06/10 New Remote Pendants Have Been Released For The Series F Pavers {5639, 7451}
Rework Procedure for 393-0565 Coolant Tank As for Certain 924G, 928G, 930G Wheel Loader and IT28G Integrated Toolcarrier.{1063, 1353, 1377} Rework Procedure for 393-0565 Coolant Tank As for Certain 924G, 928G, 930G Wheel Loader and IT28G Integrated Toolcarrier.{1063, 1353, 1377}
2015/07/13 A New Coolant Tank Group is Now Used on Certain 924G, 928G, 930G Wheel Loader and IT28G Integrated Toolcarrier {1063, 1353, 1354, 1377}
PL83 and PL87 Pipelayer Systems Track Roller Frame
PL83 and PL87 Pipelayer Systems Hard Bar
794 AC Off-Highway Truck Field Assembly Ladder - Install
16M Series 3 and 18M Series 3 Motor Graders System Schematic
16M Series 3 and 18M Series 3 Motor Graders Diagnostic Capabilities
16M Series 3 and 18M Series 3 Motor Graders Operational Checks (Steering System)
16M Series 3 and 18M Series 3 Motor Graders Operational Checks (Hydraulic System)
16M Series 3 and 18M Series 3 Motor Graders Visual Inspection
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Axle Shaft - Remove and Install
3412E Engine for 773E Off-Highway Trucks Timing - Calibrate
CB64B, CB66B and CB68B Asphalt Compactors Machine Systems Position Sensor (Steering) - Calibrate
3412E Engine for 773E Off-Highway Trucks Engine Shutdown Occurrence
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Axle Housing (Differential and Bevel Gear) (Front) - Remove and Install
Procedure to Improve the Accumulator Mounting Group on 793D and 793D XQ Off-Highway Trucks{4331, 5057, 5077} Procedure to Improve the Accumulator Mounting Group on 793D and 793D XQ Off-Highway Trucks{4331, 5057, 5077}
2015/06/05 Cat® Reman Announces Remanufactured Cylinders For Motor Grader Applications {4303, 5102, 5106, 5211, 5213, 5223, 5229, 5265}
2015/06/05 An Improved Mirror Assembly Is Now Used on Certain 793F, 795F, and 797F Off-Highway Trucks {1408, 7319}
2015/06/10 A New O-Ring Seal is Now Used in the Rear Link Assembly on Certain 797 Off-Highway Trucks {7230}
2015/06/18 New Shipping Tires are Available for Certain Motor Graders {4200}
2015/06/12 A New Hose Is Now Used in the Air to Air After Cooler (ATAAC) Lines Group on Certain 795F Off-Highway Trucks {1063, 1071}
2015/08/03 A Procedure to Improve the Accumulator Mounting Group on 793D and 793D XQ Off-Highway Trucks is Available {4331, 5057, 5077}