New Shipping Tires are Available for Certain Motor Graders {4200}
- Motor Grader:
- 120KSeries 2 (S/N: SZS1-UP)
- 120K (S/N: SZN1-UP; JAP1-UP)
- 120MSeries 2 (S/N: M9C1-UP; M9H1-UP; R9N1-UP; R9W1-UP)
- 120M (S/N: R9A1-UP; B9C1-UP; R9C1-UP; B9N1-UP; B9W1-UP; D9W1-UP)
- 12K (S/N: JJA1-UP; SZP1-UP)
- 12MSeries 2 (S/N: F9B1-UP; F9M1-UP; R9P1-UP; R9S1-UP)
- 12MSeries 3 (S/N: N9B1-UP; N9F1-UP; N9P1-UP; N9R1-UP)
- 12MSeries II (S/N: R9R1-UP)
- 12M (S/N: B9F1-UP; B9R1-UP; B921-UP)
- 140KSeries 2 (S/N: SZW1-UP)
- 140K (S/N: JPA1-UP; SZL1-UP)
- 140MSeries 2 (S/N: M9D1-UP; R9G1-UP; M9J1-UP; R9M1-UP)
- 140MSeries 3 (S/N: N9D1-UP; N9G1-UP; N9J1-UP; N9M1-UP)
- 140M (S/N: B9D1-UP; B9G1-UP; D9G1-UP; B9M1-UP)
- 14L (S/N: B941-UP)
- 160K (S/N: SZM1-UP; JBP1-UP)
- 160MSeries 2 (S/N: M9E1-UP; M9K1-UP; R9L1-UP; R9T1-UP)
- 160MSeries 3 (S/N: N9E1-UP; N9K1-UP; N9L1-UP; N9T1-UP)
- 160M (S/N: B9E1-UP; B9L1-UP; B9T1-UP; D9T1-UP)
New tire options are now used for shipping the machines listed above. Caterpillar will discontinue shipping certain Motor-Graders with wooden or basic tires. Instead, these machines will be equipped with a more disposable rubber option. Rubber shipping tires will also improve machine operation while loading and unloading.
Show/hide table
Illustration 1 | g03844348 |
Example of shipping tire installed on a rim assembly. |
Show/hide table
Illustration 2 | g03844418 |
Example of shipping tires installed on a Motor Grader. |
Show/hide table
NOTICE |
---|
The maximum operating speed for a Motor Grader equipped with shipping tires is 11 km/h (7 mph). |
Removal and Installation Procedure
Show/hide table
Illustration 3 | g03844383 |
(A) Ring Lock (B) Flange Assembly (C) Rim Assembly |
- Remove outer lock ring (A) and flange (B) as referenced in Illustration 3.
- Bump the shipping tire off rim assembly (C) using a large rubber mallet.
- Install the preferred tire onto the rim assembly.
Note: Follow the tire installation procedure recommended by the tire manufacturer.
- Dispose of the rubber shipping tires following local regulations.
Caterpillar Information System:
2015/06/10 A New O-Ring Seal is Now Used in the Rear Link Assembly on Certain 797 Off-Highway Trucks {7230}
2015/06/05 An Improved Mirror Assembly Is Now Used on Certain 793F, 795F, and 797F Off-Highway Trucks {1408, 7319}
2015/06/05 Cat® Reman Announces Remanufactured Cylinders For Motor Grader Applications {4303, 5102, 5106, 5211, 5213, 5223, 5229, 5265}
Procedure to Improve the Accumulator Mounting Group on 793D and 793D XQ Off-Highway Trucks{4331, 5057, 5077} Procedure to Improve the Accumulator Mounting Group on 793D and 793D XQ Off-Highway Trucks{4331, 5057, 5077}
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Axle Housing (Differential and Bevel Gear) (Front) - Remove and Install
3412E Engine for 773E Off-Highway Trucks Engine Shutdown Occurrence
CB64B, CB66B and CB68B Asphalt Compactors Machine Systems Position Sensor (Steering) - Calibrate
3412E Engine for 773E Off-Highway Trucks Timing - Calibrate
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Axle Shaft - Remove and Install
MH3037 Material Handler Engine Supplement Access Door - Remove and Install - Right
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Axle Housing and Flange - Install
2015/06/10 New Remote Pendants Have Been Released For The Series F Pavers {5639, 7451}
2015/06/12 A New Hose Is Now Used in the Air to Air After Cooler (ATAAC) Lines Group on Certain 795F Off-Highway Trucks {1063, 1071}
2015/08/03 A Procedure to Improve the Accumulator Mounting Group on 793D and 793D XQ Off-Highway Trucks is Available {4331, 5057, 5077}
Procedure to Improve the Cross Support for the Exhaust Tubes on Certain 797F Off-Highway Trucks{0635, 1061} Procedure to Improve the Cross Support for the Exhaust Tubes on Certain 797F Off-Highway Trucks{0635, 1061}
2015/07/27 A Procedure to Retrofit the Exhaust Group on Certain 797F Off-Highway Trucks is Now Available {0635, 1061}
CB64B, CB66B and CB68B Asphalt Compactors Machine Systems Fan Motor Speed (Radiator Cooling) - Test
16M Series 3 and 18M Series 3 Motor Graders Sensor Signal (PWM) - Test
16M Series 3 and 18M Series 3 Motor Graders Sensor Signal (PWM) - Test
16M Series 3 and 18M Series 3 Motor Graders Sensor Signal (PWM) - Test
16M Series 3 and 18M Series 3 Motor Graders Sensor Signal (PWM) - Test
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Axle Housing (Differential and Bevel Gear) (Front) - Disassemble
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System MID 027 - CID 2976 - FMI 03
16M Series 3 and 18M Series 3 Motor Graders HVAC, Control System