Axle Housing (Differential and Bevel Gear) (Front) - Remove and Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | - | Loctite High Flex Gasket Maker | - |
B | - | Loctite 620 | - |
Start By:
- Remove the drive and steering axle.
- Remove the axle shafts.
- Attach a suitable lifting device to differential and bevel gear housing (1). The weight of differential and bevel gear housing (1) is approximately
64 kg (141 lb) . Remove bolts (2) and differential and bevel gear housing (1) from the axle housing.
Show/hide table
Illustration 1 | g01040677 |
- Install differential and bevel gear housing (1) in the reverse order of removal.
- Apply Tooling (A) to the mounting surface of differential and bevel gear housing (1).
- Apply Tooling (B) to the threads of bolts (2). Tighten bolts (2) to a torque of
169 N·m (125 lb ft) .
Caterpillar Information System:
3412E Engine for 773E Off-Highway Trucks Engine Shutdown Occurrence
CB64B, CB66B and CB68B Asphalt Compactors Machine Systems Position Sensor (Steering) - Calibrate
3412E Engine for 773E Off-Highway Trucks Timing - Calibrate
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Axle Shaft - Remove and Install
MH3037 Material Handler Engine Supplement Access Door - Remove and Install - Right
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Axle Housing and Flange - Install
2015/06/10 New Remote Pendants Have Been Released For The Series F Pavers {5639, 7451}
Rework Procedure for 393-0565 Coolant Tank As for Certain 924G, 928G, 930G Wheel Loader and IT28G Integrated Toolcarrier.{1063, 1353, 1377} Rework Procedure for 393-0565 Coolant Tank As for Certain 924G, 928G, 930G Wheel Loader and IT28G Integrated Toolcarrier.{1063, 1353, 1377}
2015/07/13 A New Coolant Tank Group is Now Used on Certain 924G, 928G, 930G Wheel Loader and IT28G Integrated Toolcarrier {1063, 1353, 1354, 1377}
PL83 and PL87 Pipelayer Systems Track Roller Frame
PL83 and PL87 Pipelayer Systems Hard Bar
794 AC Off-Highway Truck Field Assembly Ladder - Install
Procedure to Improve the Accumulator Mounting Group on 793D and 793D XQ Off-Highway Trucks{4331, 5057, 5077} Procedure to Improve the Accumulator Mounting Group on 793D and 793D XQ Off-Highway Trucks{4331, 5057, 5077}
2015/06/05 Cat® Reman Announces Remanufactured Cylinders For Motor Grader Applications {4303, 5102, 5106, 5211, 5213, 5223, 5229, 5265}
2015/06/05 An Improved Mirror Assembly Is Now Used on Certain 793F, 795F, and 797F Off-Highway Trucks {1408, 7319}
2015/06/10 A New O-Ring Seal is Now Used in the Rear Link Assembly on Certain 797 Off-Highway Trucks {7230}
2015/06/18 New Shipping Tires are Available for Certain Motor Graders {4200}
2015/06/12 A New Hose Is Now Used in the Air to Air After Cooler (ATAAC) Lines Group on Certain 795F Off-Highway Trucks {1063, 1071}
2015/08/03 A Procedure to Improve the Accumulator Mounting Group on 793D and 793D XQ Off-Highway Trucks is Available {4331, 5057, 5077}
Procedure to Improve the Cross Support for the Exhaust Tubes on Certain 797F Off-Highway Trucks{0635, 1061} Procedure to Improve the Cross Support for the Exhaust Tubes on Certain 797F Off-Highway Trucks{0635, 1061}
2015/07/27 A Procedure to Retrofit the Exhaust Group on Certain 797F Off-Highway Trucks is Now Available {0635, 1061}
CB64B, CB66B and CB68B Asphalt Compactors Machine Systems Fan Motor Speed (Radiator Cooling) - Test
16M Series 3 and 18M Series 3 Motor Graders Sensor Signal (PWM) - Test
16M Series 3 and 18M Series 3 Motor Graders Sensor Signal (PWM) - Test