Ladder - Install
Parts and Specification Information
Show/hide table
Illustration 1 | g03842851 |
Overall view of the machine |
Note: Verify that all parts are shipped and undamaged for preparation of assembly. Missing or damaged parts can be ordered prior to assembly to avoid delays during assembly.
Show/hide table
Personal injury or death can occur from heavy components falling during removal or installation. Properly support the component with a suitable lifting device during removal or installation. |
Show/hide table
Item | Part Number | Description | Qty | Specification | Approximate Weight |
1 | 444-8721 | Ladder As | 1 | |
|
2 | 201-7354 | Bolt | 4 | ||
3 | 7X-0515 | Hard Washer | 8 | ||
4 | 3K-2889 | Locknut | 4 |
- Use a suitable lifting device to position ladder assembly (1) on the left side of the front bumper.
- Secure ladder assembly (1) in place using four bolts (2), eight hard washers (3), and four locknuts (4).
Show/hide table
Illustration 2 | g03842865 |
View from below of the left front side of the machine |
Caterpillar Information System:
16M Series 3 and 18M Series 3 Motor Graders System Schematic
16M Series 3 and 18M Series 3 Motor Graders Diagnostic Capabilities
16M Series 3 and 18M Series 3 Motor Graders Operational Checks (Steering System)
16M Series 3 and 18M Series 3 Motor Graders Operational Checks (Hydraulic System)
16M Series 3 and 18M Series 3 Motor Graders Visual Inspection
16M Series 3 and 18M Series 3 Motor Graders Machine Preparation for Troubleshooting
16M Series 3 and 18M Series 3 Motor Graders Connector Locations
16M Series 3 and 18M Series 3 Motor Graders Service Tools
16M Series 3 and 18M Series 3 Motor Graders General Information
14M3 Motor Grader Electrical System Troubleshooting Wiring Harness (Short Circuit) - Test
14M3 Motor Grader Electrical System Troubleshooting Wiring Harness (Open Circuit) - Test
16M Series 3 and 18M Series 3 Motor Graders Switch Circuits - Test
PL83 and PL87 Pipelayer Systems Hard Bar
PL83 and PL87 Pipelayer Systems Track Roller Frame
2015/07/13 A New Coolant Tank Group is Now Used on Certain 924G, 928G, 930G Wheel Loader and IT28G Integrated Toolcarrier {1063, 1353, 1354, 1377}
Rework Procedure for 393-0565 Coolant Tank As for Certain 924G, 928G, 930G Wheel Loader and IT28G Integrated Toolcarrier.{1063, 1353, 1377} Rework Procedure for 393-0565 Coolant Tank As for Certain 924G, 928G, 930G Wheel Loader and IT28G Integrated Toolcarrier.{1063, 1353, 1377}
2015/06/10 New Remote Pendants Have Been Released For The Series F Pavers {5639, 7451}
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Axle Housing and Flange - Install
MH3037 Material Handler Engine Supplement Access Door - Remove and Install - Right
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Axle Shaft - Remove and Install
3412E Engine for 773E Off-Highway Trucks Timing - Calibrate
CB64B, CB66B and CB68B Asphalt Compactors Machine Systems Position Sensor (Steering) - Calibrate
3412E Engine for 773E Off-Highway Trucks Engine Shutdown Occurrence
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Axle Housing (Differential and Bevel Gear) (Front) - Remove and Install