System Schematic
The electrical schematics that follow are simplified schematics for the Implement Electronic Control System of the Series M3 Motor Graders. The schematics are electrically correct. The schematics show the input connections and the output connections on the Implement ECM, the Implement ECM 2, and the Implement ECM 3.
The electrical schematics do not show all possible harness connectors. The schematics do not show all related electrical systems on the machine. For a complete electrical system schematic of a particular machine, always refer to the Electrical System Schematic in the Service Manual for your machine.
Show/hide table
| |
| Illustration 1 | g03896287 |
Show/hide table
| |
| Illustration 2 | g03842754 |
Show/hide table
| |
| Illustration 3 | g03842758 |
Show/hide table
| |
| Illustration 4 | g03842761 |
Show/hide table
| |
| Illustration 5 | g03842762 |
Show/hide table
| |
| Illustration 6 | g03842764 |
Show/hide table
| |
| Illustration 7 | g03842766 |
Show/hide table
| |
| Illustration 8 | g03843256 |
Show/hide table
| |
| Illustration 9 | g03842644 |
Caterpillar Information System:
16M Series 3 and 18M Series 3 Motor Graders Diagnostic Capabilities
16M Series 3 and 18M Series 3 Motor Graders Operational Checks (Steering System)
16M Series 3 and 18M Series 3 Motor Graders Operational Checks (Hydraulic System)
16M Series 3 and 18M Series 3 Motor Graders Visual Inspection
16M Series 3 and 18M Series 3 Motor Graders Machine Preparation for Troubleshooting
16M Series 3 and 18M Series 3 Motor Graders Connector Locations
16M Series 3 and 18M Series 3 Motor Graders Service Tools
16M Series 3 and 18M Series 3 Motor Graders General Information
14M3 Motor Grader Electrical System Troubleshooting Wiring Harness (Short Circuit) - Test
14M3 Motor Grader Electrical System Troubleshooting Wiring Harness (Open Circuit) - Test
16M Series 3 and 18M Series 3 Motor Graders Switch Circuits - Test
AP255E Asphalt Paver Engine Supplement Gear Motor (Hydraulic Fan) - Install
794 AC Off-Highway Truck Field Assembly Ladder - Install
PL83 and PL87 Pipelayer Systems Hard Bar
PL83 and PL87 Pipelayer Systems Track Roller Frame
2015/07/13 A New Coolant Tank Group is Now Used on Certain 924G, 928G, 930G Wheel Loader and IT28G Integrated Toolcarrier {1063, 1353, 1354, 1377}
Rework Procedure for 393-0565 Coolant Tank As for Certain 924G, 928G, 930G Wheel Loader and IT28G Integrated Toolcarrier.{1063, 1353, 1377} Rework Procedure for 393-0565 Coolant Tank As for Certain 924G, 928G, 930G Wheel Loader and IT28G Integrated Toolcarrier.{1063, 1353, 1377}
2015/06/10 New Remote Pendants Have Been Released For The Series F Pavers {5639, 7451}
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Axle Housing and Flange - Install
MH3037 Material Handler Engine Supplement Access Door - Remove and Install - Right
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Axle Shaft - Remove and Install
3412E Engine for 773E Off-Highway Trucks Timing - Calibrate
CB64B, CB66B and CB68B Asphalt Compactors Machine Systems Position Sensor (Steering) - Calibrate
3412E Engine for 773E Off-Highway Trucks Engine Shutdown Occurrence