Rust At The Threaded Openings Of Air Conditioning Accumulators Could Cause A Restriction Of The A/C System Caterpillar


Rust At The Threaded Openings Of Air Conditioning Accumulators Could Cause A Restriction Of The A/C System

Usage:

GENERALALL CATERPILLAR PRODUCTS USING THE 3E-0443 ACCUMULATOR, 151-5261 ACCUMULATOR, OR 152-2823 ACCUMULATOR

Problem:

Rust can accumulate on the threaded openings of certain air conditioner accumulators. The suspect accumulators are 3E-0443 Accumulator, 151-5261 Accumulator, and 152-2823 Accumulator. The rust condition can cause a restriction in the air conditioning system.

Solution:

If service work needs to be performed on an air conditioning system or a complaint arises concerning a restriction in the system, inspect the accumulator for rust in the openings. Use a wire brush to remove the rust. Lubricate the threads with mineral. See the illustration for typical openings for rust accumulation.

COPYRIGHT 1999 CATERPILLAR ALL RIGHTS RESERVED

Caterpillar Information System:

Improved Routing Of E-Stick Extension Cylinder Lines Improved Routing Of E-Stick Extension Cylinder Lines
3306 Engine Oil Pan Plate Leaks 3306 Engine Oil Pan Plate Leaks
3300 Generator Set Oil Level Maintenance And High Oil Consumption 3300 Generator Set Oil Level Maintenance And High Oil Consumption
Valve Lifter "Ticking" Noise Valve Lifter "Ticking" Noise
Correct "Key" Part Number And Group Code Number To Use When Filing Warranty Claims Related To Jacobs Exhaust Brake Service Letter E489 Correct "Key" Part Number And Group Code Number To Use When Filing Warranty Claims Related To Jacobs Exhaust Brake Service Letter E489
135-9851 Oxygen Sensor Adapter Ringer Installation 135-9851 Oxygen Sensor Adapter Ringer Installation
Jacket Water Side Cover Bolt Breakage Jacket Water Side Cover Bolt Breakage
Transmissions Equipped With Electronic Clutch Pressure Controls (ECPC) Transmissions Equipped With Electronic Clutch Pressure Controls (ECPC)
Troubleshooting Procedure For Fault Code 501-10 (DMC Fault) Troubleshooting Procedure For Fault Code 501-10 (DMC Fault)
Repeated False "No Mag Interface" Shutdowns Repeated False "No Mag Interface" Shutdowns
Longer Fumes Disposal Hoses Available Longer Fumes Disposal Hoses Available
Camshaft Injector Lifter (Roller Follower) Assembly Replacement Camshaft Injector Lifter (Roller Follower) Assembly Replacement
3300 Engine Oil Level Maintenance And High Oil Consumption 3300 Engine Oil Level Maintenance And High Oil Consumption
1999 Model Year ADEM2000 Heavy Duty Truck Engine Software "Bug" 1999 Model Year ADEM2000 Heavy Duty Truck Engine Software "Bug"
Flashing 1999 Model Year ADEM2000 Truck Engines Flashing 1999 Model Year ADEM2000 Truck Engines
Two Stage Aftercooler Vent Tube Two Stage Aftercooler Vent Tube
Machining Premachined Valve Seat Inserts Machining Premachined Valve Seat Inserts
Unit Injector Tip Failure Unit Injector Tip Failure
3412C Jacket Water Heater Hose Relocation 3412C Jacket Water Heater Hose Relocation
G3600 Engines Operating Outdoors (Protection From Environmental Conditions) G3600 Engines Operating Outdoors (Protection From Environmental Conditions)
Low Idle Instability Low Idle Instability
High Oil Consumption High Oil Consumption
1. Snap Spring for New 169-4290 Terminal Assembly May Fail And Result In Turbocharger Damage; 2. New Extension And Spacer Are Required For New Terminal Assembly 1. Snap Spring for New 169-4290 Terminal Assembly May Fail And Result In Turbocharger Damage; 2. New Extension And Spacer Are Required For New Terminal Assembly
Lower Radiator Hose Lower Radiator Hose
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.