Hydraulic Lockout Control - Disassemble
Start By:
- Remove the hydraulic lockout control. Refer to Disassembly and Assembly, "Hydraulic Lockout Control - Remove".
- Remove retaining rings (1) and lever assembly (2).
- Remove retaining ring (4), lever assembly (5), and spring (3).
Show/hide table
Illustration 2 g01187383 - Pull back cover (8) in order to remove pin (7) from pipe assembly (6).
Show/hide table
Illustration 3 g01187385 Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Remove pin (10) from pin (9).
- Remove spring (11) from cover (12).
Show/hide table
| |
| Illustration 1 | g01187382 |
Show/hide table
|
|
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
Caterpillar Information System:
Installation Procedure for the 465-3300 Lines Gp - Coupler on Certain Backhoe Loaders{5057} Installation Procedure for the 465-3300 Lines Gp - Coupler on Certain Backhoe Loaders{5057}
RM500B Reclaimer Mixer Power Train Case Drain Flow for Piston Motor (Propel) - Test
MH3037 Material Handler Machine Systems Hydraulic Lockout Control - Assemble
MH3037 Material Handler Machine Systems Seat - Remove and Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Tire and Rim (Rear) - Remove and Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Tire and Rim (Front) - Remove and Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Drive Shaft (Rear) - Remove and Install
C3.4B Engines Engine Monitoring System
C3.4B Engines Diesel Particulate Filter Regeneration
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Drive Shaft (Front) - Remove and Install
2015/02/18 New Hose Assembly is now Used in the Power Train Oil Lines Group on Certain PL-87 Pipelayers {3016}
2014/11/20 A Procedure Is Available to Install New Cable Guides for the Cab on Certain 553C, 563C, 573C, 2570C, and 2670C Wheel Feller Bunchers {0679, 3065, 3168, 5154, 5180, 7050, 7301}
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Tie Rod (Steering)(Front) - Remove and Install
416F2, 420F2 and 430F2 Backhoe Loaders Caterpillar Approved Work Tools
MH3037 Material Handler Machine Systems Hydraulic Lockout Control - Install
MH3037 Material Handler Machine Systems Hydraulic Lockout Control - Remove
2014/12/24 A New Nut and Bearing Improve Final Drive Nut Retention on Certain 450E and 450F Backhoe Loaders {4008}
PL72 Pipelayer Track - Check/Adjust
CB44B, CB54B, CD44B and CD54B Vibratory Asphalt Compactors Machine Electronic Control System MID 039 - CID 4580 - FMI 03
CB44B, CB54B, CD44B and CD54B Vibratory Asphalt Compactors Machine Electronic Control System MID 039 - CID 4580 - FMI 04
CB44B, CB54B, CD44B and CD54B Vibratory Asphalt Compactors Machine Electronic Control System MID 039 - CID 4580 - FMI 08
CB44B, CB54B, CD44B and CD54B Vibratory Asphalt Compactors Machine Electronic Control System MID 039 - CID 4580 - FMI 13
2015/04/08 New Software Patches Are Now Available for Cat® MineStar Fleet & Health Office v4.0.7 {7605, 7620}
2014/12/23 New Software Is Now Available For Cat ® MineStar Fleet and Health Office v4.0.7 {7605}