A New Nut and Bearing Improve Final Drive Nut Retention on Certain 450E and 450F Backhoe Loaders {4008}
- Backhoe Loader:
- 450E (S/N: RBA1-UP; EBL1-UP; LYR1-UP)
- 450F (S/N: HJR1-UP)
Description of Change: Improved nut and bearing now used on the listed Backhoe Loaders. The improved nut and bearing provide increased retention of drive nut.
Adaptable To: The improved nut and bearing are effective in production with, and adaptable to the following machines.
Show/hide table
Machine     | Effective With     | Adaptable To     |
450E     | -     | S/N:EBL1-UP     |
450E     | S/N:LYR160-UP     | S/N:LYR1-159     |
450E     | -     | S/N:RBA1-UP     |
450F     | S/N:HJR333-UP     | S/N:HJR1-332     |
Show/hide table
Quantity     | New Part Number     | Description     |
1     | 451-5463     | Nut     |
1     | 451-5464     | Bearing As     |
Caterpillar Information System:
MH3037 Material Handler Machine Systems Hydraulic Lockout Control - Remove
MH3037 Material Handler Machine Systems Hydraulic Lockout Control - Install
416F2, 420F2 and 430F2 Backhoe Loaders Caterpillar Approved Work Tools
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Tie Rod (Steering)(Front) - Remove and Install
MH3037 Material Handler Machine Systems Hydraulic Lockout Control - Disassemble
Installation Procedure for the 465-3300 Lines Gp - Coupler on Certain Backhoe Loaders{5057} Installation Procedure for the 465-3300 Lines Gp - Coupler on Certain Backhoe Loaders{5057}
RM500B Reclaimer Mixer Power Train Case Drain Flow for Piston Motor (Propel) - Test
MH3037 Material Handler Machine Systems Hydraulic Lockout Control - Assemble
MH3037 Material Handler Machine Systems Seat - Remove and Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Tire and Rim (Rear) - Remove and Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Tire and Rim (Front) - Remove and Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Drive Shaft (Rear) - Remove and Install
PL72 Pipelayer Track - Check/Adjust
CB44B, CB54B, CD44B and CD54B Vibratory Asphalt Compactors Machine Electronic Control System MID 039 - CID 4580 - FMI 03
CB44B, CB54B, CD44B and CD54B Vibratory Asphalt Compactors Machine Electronic Control System MID 039 - CID 4580 - FMI 04
CB44B, CB54B, CD44B and CD54B Vibratory Asphalt Compactors Machine Electronic Control System MID 039 - CID 4580 - FMI 08
CB44B, CB54B, CD44B and CD54B Vibratory Asphalt Compactors Machine Electronic Control System MID 039 - CID 4580 - FMI 13
2015/04/08 New Software Patches Are Now Available for Cat® MineStar Fleet & Health Office v4.0.7 {7605, 7620}
2014/12/23 New Software Is Now Available For Cat ® MineStar Fleet and Health Office v4.0.7 {7605}
2015/01/29 Rework Procedure for Mounting the Improved Fuel Priming Switch Bracket on Certain 793F, 795F, and 797F Large Off-Highway Trucks {1258, 1408, 7332}
2014/12/12 Removal Of The DC Bus Capacitor On Certain 795F AC Off-Highway Trucks {1619}
966M XE and 972M XE Wheel Loaders Diagnostic Trouble Codes
2015/08/19 An Improved Mirror Assembly Is Now Used on Certain G Series Off-Highway Trucks and Quarry Trucks {7319}
C3.4B Engines Diagnostic Capabilities