Drive Shaft (Rear) - Remove and Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 155-3597 | Wheel Chock | 4 |
- Use Tooling (A) to block the tires. Remove bolts (1). Discard bolts (1).
Show/hide table
Illustration 2 g01116782 - Remove bolts (3). Discard bolts (3). Remove rear drive shaft (2).
Show/hide table
Illustration 1 | g01116752 |
- Install rear drive shaft (2) in the reverse order of removal.
- Install new bolts (1) and (3). Tighten bolts (1) and (3) to a torque of
28 ± 7 N·m (248 ± 62 lb in) .
- Install new bolts (1) and (3). Tighten bolts (1) and (3) to a torque of
Caterpillar Information System:
C3.4B Engines Engine Monitoring System
C3.4B Engines Diesel Particulate Filter Regeneration
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Drive Shaft (Front) - Remove and Install
2015/02/18 New Hose Assembly is now Used in the Power Train Oil Lines Group on Certain PL-87 Pipelayers {3016}
2014/11/20 A Procedure Is Available to Install New Cable Guides for the Cab on Certain 553C, 563C, 573C, 2570C, and 2670C Wheel Feller Bunchers {0679, 3065, 3168, 5154, 5180, 7050, 7301}
C3.4B Engines Component Location
C3.4B Engines Service Information Report
966M XE and 972M XE Wheel Loaders Battery Cable Shield - Test
C3.4B Engines General Information
330F MHPU Mobile Hydraulic Power Unit Machine System Gear Pump
950M and 962M Wheel Loaders Battery Cable Shield - Test
980M and 982M Medium Wheel Loaders Battery Cable Shield - Test
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Tire and Rim (Front) - Remove and Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Tire and Rim (Rear) - Remove and Install
MH3037 Material Handler Machine Systems Seat - Remove and Install
MH3037 Material Handler Machine Systems Hydraulic Lockout Control - Assemble
RM500B Reclaimer Mixer Power Train Case Drain Flow for Piston Motor (Propel) - Test
Installation Procedure for the 465-3300 Lines Gp - Coupler on Certain Backhoe Loaders{5057} Installation Procedure for the 465-3300 Lines Gp - Coupler on Certain Backhoe Loaders{5057}
MH3037 Material Handler Machine Systems Hydraulic Lockout Control - Disassemble
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Tie Rod (Steering)(Front) - Remove and Install
416F2, 420F2 and 430F2 Backhoe Loaders Caterpillar Approved Work Tools
MH3037 Material Handler Machine Systems Hydraulic Lockout Control - Install
MH3037 Material Handler Machine Systems Hydraulic Lockout Control - Remove
2014/12/24 A New Nut and Bearing Improve Final Drive Nut Retention on Certain 450E and 450F Backhoe Loaders {4008}