New Front Bucket Clam Is Now Used on E and F Series Backhoe Loaders {6104}
- Backhoe Loader:
- 422E (S/N: MAW1-UP)
- 422F (S/N: LRH1-UP)
- 428E (S/N: DPH1-UP)
- 428F (S/N: LBH1-UP; SJW1-UP)
- 432E (S/N: JBA1-UP)
- 432F (S/N: SEJ1-UP; LNR1-UP)
- 434E (S/N: SEF1-UP; SJL1-UP)
- 442E (S/N: EME1-UP)
- 444E (S/N: NBA1-UP)
Description of Change: A new front bucket clam is now used on certain "E" and "F" series Backhoe Loaders. The new bucket clam is fabricated from a higher strength steel and is less prone to bending under hard material conditions extending the service life.
Adaptable To:
Show/hide table
Illustration 1 | g03730678 |
252-9051 Multipurpose Bucket Clam As |
The former clam assembly is replaced by the 252-9051 Multipurpose Bucket Clam As. This change can be identified by the number of serrations on the clam side plate. The old version had four serrations and the new version has five.
This change is Adaptable To and Effective With the following machines:
Show/hide table
Effectivity     | ||
Model     | Adaptable To     | Effective with     |
422E     | S/N:MAW1-1825     | S/N:MAW1826-UP     |
422F     | S/N:LRH1-1630     | S/N:LRH1631-1631     |
428E     | S/N:DPH1-687,689-4497     | S/N:DPH4498-UP     |
428F     | S/N:LBH1-3906,3908-3920     | S/N:LBH3921-UP     |
S/N:SJW1-425,430-707 | S/N:SJW708-UP     | |
432E     | S/N:JBA1-2688     | S/N:JBA2689-UP     |
432F     | S/N:LNR1-754,756-1031     | S/N:LNR1032-UP     |
S/N:SEJ1-445,447-824,833-895 | S/N:SEJ896-UP     | |
434E     | S/N:SEF1-288,319-624     | S/N:SEF625-UP     |
S/N:SJL1-398,426-698,700-752 | S/N:SJL753-UP     | |
442E     | S/N:EME1-261     | S/N:EME262-UP     |
444E     | S/N:NBA1-417     | S/N:NBA418-UP     |
Caterpillar Information System:
SE50 VT Asphalt Screed Height Adjuster (End Gate) - Manual
SE50 VT Asphalt Screed Heater (End Gate)
SE60 VT XW and SE60 V XW Asphalt Screed Machine Systems Hydraulic Cylinder (End Gate)
SE60 VT XW and SE60 V XW Asphalt Screed Machine Systems Heater (End Gate)
SE60 VT XW and SE60 V XW Asphalt Screed Machine Systems Height Adjuster (End Gate) - Hydraulic
SE50 VT Asphalt Screed Screed Control and Mounting
QUICK COUPLERS Coupler Cylinder
725C Articulated Truck Tailgate (Scissors) - Remove and Install
2014/10/13 Alternative Speed Sensor Orientation Is Used On Certain Off-Highway Trucks {3175}
2014/09/26 New Engine Software Is Used on Certain 14M and 16M Motor Graders {1920}
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Brake Control Valve (Service) - Remove and Install
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Implement Cycle Time - Check
428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Rated Load
2014/10/15 Improved Lubrication Lines Group Is Now Used on 14M Motor Graders {7510}
2014/10/01 An Improved Air Lines Group Is Now Available on Certain 14M Motor Graders {1071}
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Brake Control Valve (Parking) - Remove and Install
Installation of the 466-1959 Kit for Closed Crankcase Breather (CCB) On Certain Machines Equipped with C3.3B Tier 4 Final Engines {1317} Installation of the 466-1959 Kit for Closed Crankcase Breather (CCB) On Certain Machines Equipped with C3.3B Tier 4 Final Engines {1317}
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Ride Control Accumulator - Test and Charge
C3.4B Engines Relay - Test - Start Relay
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Brake Control Valve (Parking) - Remove and Install
428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Specifications
725C2 and 730C2 Articulated Truck Machine System Front Frame and Rear Frame - Separate
785G Off-Highway Truck Systems Brake Valve (Front Service Brake)
AP655F and AP655F L Asphalt Paver Machine Systems Screed Frame