AP655F and AP655F L Asphalt Paver Machine Systems Caterpillar


Screed Frame

Usage:

AP655F 655


Illustration 1g03730822

Table 1
Specification for 390-4822 Screed Frame 
Item  Qty  Part  Specification Description 
24  422-4637 Nut  Before assembly, apply Loctite C5A Copper Anti-Seize to the threads.
Tighten nut, until the nut contacts with screed plate. Then, back off the nut by 90 degrees. 


Illustration 2g03730823
Detailed view of area A

Table 2
Item  Qty  Part  Specification Description 
As required, use any combination of below two shims in order to limit the gap between outside end of plate and extender tube to maximum of 0.5 mm (0.02 inch)
457-5146 Shim  Thickness of one new shim is 0.8 mm (0.03150 inch)
440-9436 Shim  Thickness of one new shim is 1.6 mm (0.063 inch)
440-9437 Shim  Thickness of one new shim is 3.0 ± 0.3 mm (0.12 ± 0.012 inch)
457-5245 Shim  Thickness of one new shim is 0.8 mm (0.03150 inch)
422-9030 Shim  Thickness of one new shim is 1.6 mm (0.063 inch)
422-9029 Shim  Thickness of one new shim is 3.0 ± 0.3 mm (0.12 ± 0.012 inch)

Caterpillar Information System:

785G Off-Highway Truck Systems Brake Valve (Front Service Brake)
725C2 and 730C2 Articulated Truck Machine System Front Frame and Rear Frame - Separate
428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Specifications
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Brake Control Valve (Parking) - Remove and Install
C3.4B Engines Relay - Test - Start Relay
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Ride Control Accumulator - Test and Charge
Installation of the 466-1959 Kit for Closed Crankcase Breather (CCB) On Certain Machines Equipped with C3.3B Tier 4 Final Engines {1317} Installation of the 466-1959 Kit for Closed Crankcase Breather (CCB) On Certain Machines Equipped with C3.3B Tier 4 Final Engines {1317}
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Brake Control Valve (Parking) - Remove and Install
2014/10/01 An Improved Air Lines Group Is Now Available on Certain 14M Motor Graders {1071}
2014/10/15 Improved Lubrication Lines Group Is Now Used on 14M Motor Graders {7510}
428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Rated Load
2014/09/29 New Front Bucket Clam Is Now Used on E and F Series Backhoe Loaders {6104}
785G Off-Highway Truck Systems Final Drive, Brake, and Wheel
PL83 and PL87 Pipelayers Air Conditioner Condenser - Clean - If Equipped
785G Off-Highway Truck Systems Brake Valve (Front Service Brake)
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Bulldozer Stabilizer - Remove and Install
785G Off-Highway Truck Systems Brake Valve (Rear Service Brake)
Instructions for Installing Cab Storage Compartments on Certain M, M Series 2 and M Series 3 Motor Graders{7266, 7301, 7329} Instructions for Installing Cab Storage Compartments on Certain M, M Series 2 and M Series 3 Motor Graders{7266, 7301, 7329}
2014/09/29 The Multipurpose Bucket Cylinder Has Been Improved for Certain F Series Backhoe Loaders {5457, 6104}
PL83 and PL87 Pipelayers Engine Oil Level - Check
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Piston Pump (Implement) - Test and Adjust
2014/12/09 Maintenance Parts for the Automatic Lubrication Group are Now Available for Certain Off-Highway Trucks {7516, 7540}
558 Forest Machine Maintenance Interval Schedule
785G Off-Highway Truck Systems Slack Adjuster (Front Brakes)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.