Relief Valve (Cylinder Crossover)
Show/hide table
Illustration 1 | g03728870 |
Show/hide table
Specification for 416-5512 Relief Valve (Cylinder Crossover) | |||
Item | Qty | Part | Specification Description |
1 | 1 | Nut | Tighten to |
2 | 1 | Nut | Tighten to |
3 | 1 | Nut | Tighten to |
- | - | - | Flow rate |
- | - | - | Relief valve pressure setting |
Caterpillar Information System:
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Accumulator Charging Valve (Brake) - Remove and Install
785G Off-Highway Truck Systems Gear Pump (Brake, Front Brake Cooling, HVAC)
785G Off-Highway Truck Systems Solenoid Valve (Steering)
PL83 and PL87 Pipelayers Engine Air Filter Secondary Element - Replace
PL83 and PL87 Pipelayers Engine Air Filter Primary Element - Clean/Replace
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Lift and Tilt Cylinder Drift - Check
785G Off-Highway Truck Systems Solenoid and Relief Valve (Steering)
785G Off-Highway Truck Systems Hydraulic Tank and Mounting
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Transmission Neutralizer Switch - Integrated Braking System (IBS)
Assemble Procedure for Pads for Use with Clam Shell (MP) Buckets{6104} Assemble Procedure for Pads for Use with Clam Shell (MP) Buckets{6104}
785G Off-Highway Truck Systems Check Valve (Steering)
AP255E Asphalt Paver Propel System Flushing Valve (Propel Pump) - Test
The Brake System Pump is Failing on Certain 793F Off-Highway Trucks{5073} The Brake System Pump is Failing on Certain 793F Off-Highway Trucks{5073}
C7 and C9 Industrial Engines Engine Has Mechanical Noise (Knock)
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders MID 081 - CID 0688 - FMI 06
C7 and C9 Industrial Engines Air Shutoff - Test
C4.4 Engines Valve Position - Test
C4.4 and C7.1 Engines Water in Fuel - Test
C4.4 Engines for Caterpillar Built Machines Temperature Sensor (Catalyst Inlet) - Remove and Install
C3.4B Engines NOx Sensor - Test
C4.4 Engines for Caterpillar Built Machines Ammonia Sensor - Remove and Install - Ammonia Sensor if Equipped
785G Off-Highway Truck Systems Steering Gear
Procedure to Install the 460-7644 Fuel Lines Gp on Certain 24M Motor Grader Engines{1274} Procedure to Install the 460-7644 Fuel Lines Gp on Certain 24M Motor Grader Engines{1274}
2015/02/19 New Front and Rear Crankshaft Seals Are Used on Certain 3500 Machine Engines {1160, 1161, 7555}