Solenoid Valve (Steering)
Show/hide table
| |
| Illustration 1 | g06208908 |
Show/hide table
| Item | Qty | Part | Specification Description |
| 1 | - | Coil Nut | Final installation torque to |
| - | - | - | Operating voltage is 24 VDC.
Resistance at |
Caterpillar Information System:
PL83 and PL87 Pipelayers Engine Air Filter Secondary Element - Replace
PL83 and PL87 Pipelayers Engine Air Filter Primary Element - Clean/Replace
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Lift and Tilt Cylinder Drift - Check
785G Off-Highway Truck Systems Solenoid and Relief Valve (Steering)
785G Off-Highway Truck Systems Hydraulic Tank and Mounting
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Transmission Neutralizer Switch - Integrated Braking System (IBS)
Assemble Procedure for Pads for Use with Clam Shell (MP) Buckets{6104} Assemble Procedure for Pads for Use with Clam Shell (MP) Buckets{6104}
785G Off-Highway Truck Systems Check Valve (Steering)
AP255E Asphalt Paver Propel System Flushing Valve (Propel Pump) - Test
C7 and C9 Industrial Engines Engine Cranks but Does Not Start
C15 and C18 Engines for Caterpillar Built Machines ECM Does Not Communicate with Other Modules
C7 and C9 Industrial Engines Cylinder Is Noisy
785G Off-Highway Truck Systems Gear Pump (Brake, Front Brake Cooling, HVAC)
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Accumulator Charging Valve (Brake) - Remove and Install
785G Off-Highway Truck Systems Relief Valve (Cylinder Crossover)
The Brake System Pump is Failing on Certain 793F Off-Highway Trucks{5073} The Brake System Pump is Failing on Certain 793F Off-Highway Trucks{5073}
C7 and C9 Industrial Engines Engine Has Mechanical Noise (Knock)
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders MID 081 - CID 0688 - FMI 06
C7 and C9 Industrial Engines Air Shutoff - Test
C4.4 Engines Valve Position - Test
C4.4 and C7.1 Engines Water in Fuel - Test
C4.4 Engines for Caterpillar Built Machines Temperature Sensor (Catalyst Inlet) - Remove and Install
C3.4B Engines NOx Sensor - Test
C4.4 Engines for Caterpillar Built Machines Ammonia Sensor - Remove and Install - Ammonia Sensor if Equipped