Steering Gear
Show/hide table
| |
| Illustration 1 | g06206765 |
Show/hide table
| Item | Qty | Part | Specification Description |
| 1 | - | - | Torque to |
| 2 | - | - | Torque to |
| 3 | 2 | 120-3956 Bolt | Torque to |
| 4 | - | - | Before assembly, apply 458-0955 Grease generously, at least |
| 5 | - | - | Before assembly, apply black Loctite 593 around the perimeter of the adapter as shown in the Illustration 1. |
Caterpillar Information System:
C4.4 Engines for Caterpillar Built Machines Ammonia Sensor - Remove and Install - Ammonia Sensor if Equipped
C3.4B Engines NOx Sensor - Test
C4.4 Engines for Caterpillar Built Machines Temperature Sensor (Catalyst Inlet) - Remove and Install
C4.4 and C7.1 Engines Water in Fuel - Test
C4.4 Engines Valve Position - Test
C7 and C9 Industrial Engines Air Shutoff - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders MID 081 - CID 0688 - FMI 06
C7 and C9 Industrial Engines Engine Has Mechanical Noise (Knock)
The Brake System Pump is Failing on Certain 793F Off-Highway Trucks{5073} The Brake System Pump is Failing on Certain 793F Off-Highway Trucks{5073}
785G Off-Highway Truck Systems Relief Valve (Cylinder Crossover)
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Accumulator Charging Valve (Brake) - Remove and Install
785G Off-Highway Truck Systems Gear Pump (Brake, Front Brake Cooling, HVAC)
Procedure to Install the 460-7644 Fuel Lines Gp on Certain 24M Motor Grader Engines{1274} Procedure to Install the 460-7644 Fuel Lines Gp on Certain 24M Motor Grader Engines{1274}
2015/02/19 New Front and Rear Crankshaft Seals Are Used on Certain 3500 Machine Engines {1160, 1161, 7555}
C4.4 Engines for Caterpillar Built Machines Temperature Sensor (Exhaust) - Remove and Install - Selective Catalytic Reduction (SCR) Temperature Sensor
Cat® Reman Injectors with Invalid Injector Trim Files {1290} Cat® Reman Injectors with Invalid Injector Trim Files {1290}
PL83 and PL87 Pipelayers Alternate Exit
2014/09/26 A New Special Instruction Is Now Available for Bypassing EGR Relay in EMCP2 Controls on Certain Generator Sets {1908, 4490, 4493}
PL83 and PL87 Pipelayers Refrigerant Dryer - Replace - If Equipped
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Transmission Hydraulic Control Operation
785G Off-Highway Truck Systems Front Wheel
785G Off-Highway Truck Systems Liquid Level Sensor (Hydraulic Tank)
785G Off-Highway Truck Systems Pump Drive Group
785G Off-Highway Truck Systems Steering Cylinder