New Steering Cylinder Rods are Now Used on 795F AC, and 795F XQ Off-Highway Trucks {4303}
- Off-Highway Truck/Tractor:
- 795F AC (S/N: ERM1-UP)
- 795F (S/N: SNT1-UP)
Description of Change:
Show/hide table
Illustration 1 | g03685308 |
The bore (1) in the new steering cylinder rod is 5 mm (0.2 inch) deeper. The additional depth will help prevent damage or distortion to the position sensor rod.
Adaptable To: The new 453-2514 Rod As (2) replaces the former 307-3202 Rod As in the 305-3809 Steering Cylinder Gp .
The new 453-2514 Rod As (2) is adaptable to machines ERM1-290 and SNT1.
The new 453-2514 Rod As (2) became effective in production with machines ERM291-UP and SNT2-UP.
The former 307-3202 Rod As can be updated to the current design. Drill bore (1) for the position sensor rod 5 mm (0.2 inch) deeper into the rod. If the position sensor group was damaged, replace the position sensor group with a new 307-3254 Position Sensor Gp.
Caterpillar Information System:
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Position Sensor (Steering Cylinder) - Set
2014/08/15 New Steering Cylinder Rods are Now Used on 793F AC, and 793F CMD Off-Highway Trucks {4303}
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Steering Time - Check
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Parking Brake - Test and Adjust
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Relief Valve (Pump Backup) - Test and Adjust
2014/06/17 A Procedure to Install an Improved Steering Tube Assembly on the 795F AC Off-Highway Truck is Available {4304}
PM-200 Cold Planer Rotor Service Switch (Rotate)
Procedure to Install an Improved Steering Tube Assembly on the 795F AC Off-Highway Truck{0679, 4304, 7051} Procedure to Install an Improved Steering Tube Assembly on the 795F AC Off-Highway Truck{0679, 4304, 7051}
14L Motor Grader Implement Electronic Control System MID 082 - CID 2214 - FMI 05
14L Motor Grader Implement Electronic Control System MID 082 - CID 2214 - FMI 03
2014/06/10 The Final Drive Oil Filter Brackets on the Rear Axle Housing Group are now Serviceable for the 795F AC Off-Highway Truck {3260, 3260}
14L Motor Grader Implement Electronic Control System MID 082 - CID 2213 - FMI 13
2014/07/25 New Steering Cylinder Rod is Now Used on 797F Off-Highway Trucks {4303}
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Scale System
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Display Modules
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Service Tool Software
Procedure to Upgrade Certain R2900G Load Haul Dump Machines {1408, 3101, 3159, 7000} Procedure to Upgrade Certain R2900G Load Haul Dump Machines {1408, 3101, 3159, 7000}
793F and 797F Off-Highway Trucks Braking System E527 High Brake Pump Command
C4.4 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
C4.4 Engines for Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
C4.4 Engines for Caterpillar Built Machines Fan - Remove and Install
C4.4 Engines for Caterpillar Built Machines Fan Drive - Remove and Install
C4.4 Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
329D2 and 330D2 Excavators Machine System Specifications Main Hydraulic Pump