Fan - Remove and Install
开始:
- 拆下交流发电机皮带。 有关正确的步骤,请参阅拆解和装配, "交流发电机皮带 - 拆卸和安装"。
- 拆卸锁定螺母 (1)。
- 拆下风扇 (2)。
注: 记录风扇的方位。
- 卸下风扇适配器 (3)。
- 卸下风扇皮带轮 (4)。
- 如有必要,将螺柱 (5) 从风扇驱动 (6) 上拆下。
Show/hide table
图 1 | g02320097 |
- 确保所有部件无磨损或损坏。 如有必要,更换所有磨损或损坏的部件。
Show/hide table
图 2 g02320097 典型示例 - 如有必要,将螺柱 (5) 安装到风扇驱动 (6) 上。 将螺柱 (5) 拧紧至扭矩为
11 N·m (97 lb in) 。 - 如果先前有将螺柱 (5) 从风扇驱动 (6) 上拆下, 检查螺柱是否正确安装到风扇驱动上。 将螺柱 (5) 拧紧至扭矩为
11 N·m (97 lb in) 。 - 安装风扇皮带轮 (4)。
- 安装风扇适配器 (3)。
- 安装风扇 (2)。
注: 确保风扇朝向正确。
- 检查锁定螺母 (1) 的状况。 如有必要,更换锁定螺母。 安装锁定螺母 (1)。 拧紧锁定螺母 (1) 至扭矩为
22 N·m (195 lb in) 。
结束:
- 安装交流发电机皮带。 有关正确的步骤,请参阅拆解和装配, "交流发电机皮带 - 拆卸和安装"。
Caterpillar Information System:
C4.4 Engines for Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
C4.4 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
793F and 797F Off-Highway Trucks Braking System E527 High Brake Pump Command
Procedure to Upgrade Certain R2900G Load Haul Dump Machines {1408, 3101, 3159, 7000} Procedure to Upgrade Certain R2900G Load Haul Dump Machines {1408, 3101, 3159, 7000}
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Service Tool Software
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Display Modules
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Scale System
2014/07/25 New Steering Cylinder Rod is Now Used on 797F Off-Highway Trucks {4303}
2014/08/15 New Steering Cylinder Rods are Now Used on 795F AC, and 795F XQ Off-Highway Trucks {4303}
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Position Sensor (Steering Cylinder) - Set
2014/08/15 New Steering Cylinder Rods are Now Used on 793F AC, and 793F CMD Off-Highway Trucks {4303}
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Steering Time - Check
C4.4 Engines for Caterpillar Built Machines Fan Drive - Remove and Install
C4.4 Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
329D2 and 330D2 Excavators Machine System Specifications Main Hydraulic Pump
C4.4 Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
C4.4 Engines for Caterpillar Built Machines Rocker Shaft - Disassemble
C4.4 Engines for Caterpillar Built Machines Rocker Shaft - Assemble
C4.4 Engines for Caterpillar Built Machines Relief Valve (Fuel) - Remove and Install
C4.4 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install - Aluminum and Pressed Steel Oil Pans
C4.4 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install - Cast Iron Oil Pan
14L Motor Grader Implement Electronic Control System MID 082 - CID 2214 - FMI 06
C4.4 Engines for Caterpillar Built Machines Alternator Belt - Remove and Install - Engines With an Automatic Belt Tensioner
14L Motor Grader Implement Electronic Control System MID 082 - CID 2214 - FMI 13