Position Sensor (Steering Cylinder) - Set
Show/hide table
图 1 | g01283709 |
更换机器上其中一个转向铰接油缸位置传感器时,执行转向物理停止标定。 不再需要调整文件和最小/最大伸展测试。
有关液压转向铰接油缸的位置传感器测试信息,请参阅专门说明书, REHS7338, "液压油缸位置传感器步骤测试"。
有关从液压转向铰接油缸上拆卸和更换位置传感器的信息,请参阅针对您机器型号的拆解和装配, "U 形夹式油缸传感器 - 拆卸和安装"。
如需确定液压油缸位置传感器是否可再使用还是需予以更换,请参阅再使用和修补指南, REHS2553, "液压油缸位置传感器的再使用指南"。
Caterpillar Information System:
2014/08/15 New Steering Cylinder Rods are Now Used on 793F AC, and 793F CMD Off-Highway Trucks {4303}
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Steering Time - Check
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Parking Brake - Test and Adjust
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Relief Valve (Pump Backup) - Test and Adjust
2014/06/17 A Procedure to Install an Improved Steering Tube Assembly on the 795F AC Off-Highway Truck is Available {4304}
PM-200 Cold Planer Rotor Service Switch (Rotate)
Procedure to Install an Improved Steering Tube Assembly on the 795F AC Off-Highway Truck{0679, 4304, 7051} Procedure to Install an Improved Steering Tube Assembly on the 795F AC Off-Highway Truck{0679, 4304, 7051}
14L Motor Grader Implement Electronic Control System MID 082 - CID 2214 - FMI 05
14L Motor Grader Implement Electronic Control System MID 082 - CID 2214 - FMI 03
2014/06/10 The Final Drive Oil Filter Brackets on the Rear Axle Housing Group are now Serviceable for the 795F AC Off-Highway Truck {3260, 3260}
14L Motor Grader Implement Electronic Control System MID 082 - CID 2213 - FMI 13
725C Articulated Truck Diesel Exhaust Fluid Tank - Remove and Install
2014/08/15 New Steering Cylinder Rods are Now Used on 795F AC, and 795F XQ Off-Highway Trucks {4303}
2014/07/25 New Steering Cylinder Rod is Now Used on 797F Off-Highway Trucks {4303}
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Scale System
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Display Modules
Medium L and M Series Wheel Loaders Cat Production Measurement Application on Machines Equipped with Product Link: PLE631 or PLE641 Service Tool Software
Procedure to Upgrade Certain R2900G Load Haul Dump Machines {1408, 3101, 3159, 7000} Procedure to Upgrade Certain R2900G Load Haul Dump Machines {1408, 3101, 3159, 7000}
793F and 797F Off-Highway Trucks Braking System E527 High Brake Pump Command
C4.4 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
C4.4 Engines for Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
C4.4 Engines for Caterpillar Built Machines Fan - Remove and Install
C4.4 Engines for Caterpillar Built Machines Fan Drive - Remove and Install
C4.4 Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove