Before/After
| PRODUCT SUPPORT PROGRAM FOR INSTALLING THE 359-9613 SENSOR AND MOUNTING GROUP ON CERTAIN CG137-12 GENERATOR SETS |
7400
|
PS44833 |
NOTE: |
Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar.
|
NOTE: |
This Program must be administered either before or after failure.
In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS44833" as the Part Number
and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code.
If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
NOTE: |
The information supplied in this service letter may not be valid after the termination date of this program.
Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
The 359-9613 Sensor and Mounting Group was left off on certain CG137-12 Generator Sets. |
Qty |
Part Number |
Description |
2 |
6V8225 |
NUT-HEX |
1 |
6V8647 |
ADAPTER-STR |
4 |
6V8837 |
BOLT-HEX HEAD |
2 |
7X4805 |
SEAL-O-RING |
1 |
8C6865 |
ADAPTER-STR |
2 |
8T0275 |
BOLT-HEX HEAD |
8 |
9X8267 |
WASHER-HARD |
1 |
0551990 |
VENT |
1 |
2147566 |
SEAL-O-RING-STOR |
1 |
2198795 |
CAP-PLASTIC |
2 |
2287088 |
SEAL-O-RING-ORFS |
1 |
2946119 |
SENSOR GP-PRESS |
1 |
3448154 |
HOSE AS |
1 |
3780726 |
MANIFOLD |
1 |
3845083 |
CLIP |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 32% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
|
The parts listed in the Parts Needed will need to be assembled to form the 359-9613 Sensor and Mounting Group. For assembly instructions, refer to Engine News, SEBD9998, "The 359-9613 Sensor and Mounting Gp Is Missing On Certain CG137-12 Engines". |
Product smu/age whichever comes first |
Caterpillar |
Dealer Suggested |
Customer Suggested |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
0-8000 hrs, 0-60 mo |
100.0% |
100.0% |
0.0% |
0.0% |
0.0% |
0.0% |
NOTE: This is a 2.0-hour job
|
|
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
|
|
|