Pressure Sensor (ARD Combustion Air) - Remove and Install
- Remove panel (1).
Show/hide table
| |
| Illustration 1 | g03504161 |
- Disconnect tube assembly (4). Disconnect harness assembly (2). Remove sensor (3).
Show/hide table
| |
| Illustration 2 | g03501324 |
- Install sensor (3) in the reverse order of removal.
- Tighten pressure sensor (3) to a torque of
10 ± 2 N·m (89 ± 17 lb in) .
Note: Do not pre-tighten the sensor using the plastic portion of the sensor. Pre-tighten the sensor using the metal hex portion of the sensor. Damage can occur to the sensor if pre-tightened using the plastic portion of the sensor.
- Tighten pressure sensor (3) to a torque of
Caterpillar Information System:
836K Landfill Compactor and 834K Wheel Dozer Machine Systems Hydraulic Tank - Disassemble
14L Motor Grader Nozzle Heater Harness - Remove and Install
2014/03/05 New Chassis Software Is Now Available On Certain F Series Large Off-Highway Trucks {7620}
2014/03/25 New Exhaust Manifolds Are Used on 797 and 797B Off-Highway Trucks Equipped with 3524 Engines {1059}
836K Landfill Compactor and 834K Wheel Dozer Machine Systems Hydraulic Tank Guard - Remove and Install
2013/11/18 An Improved Differential Lock Oil Filter Element Is Now Used on Certain 24M Motor Grader {3004}
14L Motor Grader Air Control Valve (ARD Combustion) - Remove and Install
14L Motor Grader Relay (ARD Nozzle Heater) - Remove and Install
771D Off-Highway Truck TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 771D Off-Highway Truck TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
C4.4 Industrial Engine Engine Oil and Filter - Change
2013/12/06 Correction to Disassembly and Assembly , "Parking Brake - Install" for R1600H Load Haul Dump Machines {4267}
2013/12/06 Correction to Disassembly and Assembly , "Parking Brake - Assemble" for Certain R1600G Load Haul Dump Machines {4267}
14L Motor Grader Catalyst (SCR) - Remove and Install
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Location of Components (Hydraulic System)
836K Landfill Compactor and 834K Wheel Dozer Machine Systems Hydraulic Tank - Assemble
836K Landfill Compactor and 834K Wheel Dozer Machine Systems Front Frame from Rear Frame - Separate
836K Landfill Compactor and 834K Wheel Dozer Machine Systems Front Frame to Rear Frame - Connect
2013/12/06 Correction to Disassembly and Assembly , "Parking Brake - Install" for Certain R1600G Load Haul Dump Machines {4267}
Check the STIC Control on Certain R1700G, R2900G and R3000H Load Haul Dump Machines{3034, 4343} Check the STIC Control on Certain R1700G, R2900G and R3000H Load Haul Dump Machines{3034, 4343}
2013/10/31 New Metering Pump Group Is Now Introduced in 424B Backhoe Loader {4312}
988K Wheel Loader, 834K Wheel Dozer and 836K Compactor Machine Systems Parking Brake - Remove and Install
2015/01/16 New Pin Assemblies are Now Used in the Truck Body Mounting Groups on Certain Off-Highway Trucks {7258, 7258}
966M and 972M Wheel Loaders Plate Locations and Film Locations
2013/11/15 New Pressure Switch Is Now Used for the Air Conditioner Lines Group on Certain Motor Graders {1808}