Parking Brake - Remove and Install
Start By:
- Remove the cab
- Disconnect hose assemblies (1).
Show/hide table
Illustration 2 g03502251 - Disconnect hose assemblies (2).
Show/hide table
Illustration 3 g03502257 - Disconnect hose assemblies (3). Remove all cable straps .
Show/hide table
Illustration 4 g03502262 - Remove bolts (4).
Show/hide table
Illustration 5 g03502267 - Reinstall bolts (4).
Show/hide table
Illustration 6 g03502290 - Attach a suitable lifting device to parking brake (6). The weight of parking brake (6) is approximately
68 kg (150 lb) . Remove bolts (5) and parking brake (6).
Show/hide table
| |
| Illustration 1 | g03502245 |
- Install parking brake (6) in the reverse order of removal.
Caterpillar Information System:
2013/10/31 New Metering Pump Group Is Now Introduced in 424B Backhoe Loader {4312}
Check the STIC Control on Certain R1700G, R2900G and R3000H Load Haul Dump Machines{3034, 4343} Check the STIC Control on Certain R1700G, R2900G and R3000H Load Haul Dump Machines{3034, 4343}
2013/12/06 Correction to Disassembly and Assembly , "Parking Brake - Install" for Certain R1600G Load Haul Dump Machines {4267}
836K Landfill Compactor and 834K Wheel Dozer Machine Systems Front Frame to Rear Frame - Connect
836K Landfill Compactor and 834K Wheel Dozer Machine Systems Front Frame from Rear Frame - Separate
836K Landfill Compactor and 834K Wheel Dozer Machine Systems Hydraulic Tank - Assemble
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Location of Components (Hydraulic System)
14L Motor Grader Catalyst (SCR) - Remove and Install
14L Motor Grader Pressure Sensor (ARD Combustion Air) - Remove and Install
836K Landfill Compactor and 834K Wheel Dozer Machine Systems Hydraulic Tank - Disassemble
14L Motor Grader Nozzle Heater Harness - Remove and Install
2014/03/05 New Chassis Software Is Now Available On Certain F Series Large Off-Highway Trucks {7620}
2015/01/16 New Pin Assemblies are Now Used in the Truck Body Mounting Groups on Certain Off-Highway Trucks {7258, 7258}
966M and 972M Wheel Loaders Plate Locations and Film Locations
2013/11/15 New Pressure Switch Is Now Used for the Air Conditioner Lines Group on Certain Motor Graders {1808}
14L Motor Grader Nitrogen Oxide Sensor - Remove and Install - Inlet
2014/01/23 New Air Dryer Is Now Used on Certain K and K Series 2 Motor Graders {4285}
Release Notes for Cat® MineStar v3.x.x System{7605} Release Notes for Cat® MineStar v3.x.x System{7605}
14L Motor Grader Nitrogen Oxide Sensor - Remove and Install - Outlet
2013/11/08 New Product Link and VIMS3G Software for 523, A4:N4 Modules Is Now Available for Certain Large Wheel Loaders {7601, 7606}
988K Wheel Loader, 834K Wheel Dozer and 836K Compactor Machine Systems Electrohydraulic Control (Joystick) - Remove and Install
14L Motor Grader Ignition Coil - Remove and Install - CEM
14L Motor Grader Inlet Module (Catalyst) - Remove and Install - Catalyst
Command for Underground Amber Machine Automation System Warning Light Circuit - Test