New Pressure Switch Is Now Used for the Air Conditioner Lines Group on Certain Motor Graders {1808}
- Motor Grader:
- 120MSeries 2 (S/N: M9C1-UP; M9H1-UP; R9N1-UP; R9W1-UP)
- 12MSeries 2 (S/N: F9B1-UP; F9M1-UP; R9P1-UP; R9S1-UP; R9R1-UP)
- 140MSeries 2 (S/N: M9D1-UP; R9G1-UP; M9J1-UP; R9M1-UP)
- 160MSeries 2 (S/N: M9E1-UP; M9K1-UP; R9L1-UP; R9T1-UP)
Description of Change: The new pressure switch is more durable and has a robust harness abrasion sleeve to handle the vibration and weather changes. The new pressure switch will have increased service life.
Adaptable To:
Show/hide table
 | |
| Illustration 1 | g03516676 |
The new 355-3148 Pressure Switch (1) replaces the former 114-5333 Pressure Switch in the air conditioner lines group.
Note: Tighten pressure switch (1) to 8.0 ± 1.5 N·m (70.81 ± 13.28 lb in).The new 355-3148 Pressure Switch (1) is adaptable and effective in production with the machines that are listed in Table 1.
Show/hide table
| Sales Model | Adaptable To | Effective With |
| 120M Series 2 | S/N:M9C1-373 S/N:M9H1-398 S/N:R9N1-139 S/N:R9W1-137 |
S/N:M9C00374-UP S/N:M9H00-397-UP S/N:R9N00-140-UP S/N:R9W00-138-UP |
| 12M Series 2 | S/N:F9B1-184 S/N:F9M1-414 S/N:R9P1-146 S/N:R9R1-UP S/N:R9S1-234 |
S/N:F9B00-185-UP S/N:F9M00-415-UP S/N:R9P00-147-UP - S/N:R9S00-235-UP |
| 140M Series 2 | S/N:M9D1-1711 S/N:M9J1-848 S/N:R9G1-286 S/N:R9M1-392 |
S/N:M9D0-1712-UP S/N:M9J00-849-UP S/N:R9G00-287-UP S/N:R9M00-393-UP |
| 160M Series 2 | S/N:M9E1-419 S/N:M9K1-425 S/N:R9L1-205 S/N:R9T1-263 |
S/N:M9E00-410-UP S/N:M9K00-426-UP S/N:R9L00206-UP S/N:R9T00-264-UP |
Caterpillar Information System:
966M and 972M Wheel Loaders Plate Locations and Film Locations
2015/01/16 New Pin Assemblies are Now Used in the Truck Body Mounting Groups on Certain Off-Highway Trucks {7258, 7258}
988K Wheel Loader, 834K Wheel Dozer and 836K Compactor Machine Systems Parking Brake - Remove and Install
2013/10/31 New Metering Pump Group Is Now Introduced in 424B Backhoe Loader {4312}
Check the STIC Control on Certain R1700G, R2900G and R3000H Load Haul Dump Machines{3034, 4343} Check the STIC Control on Certain R1700G, R2900G and R3000H Load Haul Dump Machines{3034, 4343}
2013/12/06 Correction to Disassembly and Assembly , "Parking Brake - Install" for Certain R1600G Load Haul Dump Machines {4267}
836K Landfill Compactor and 834K Wheel Dozer Machine Systems Front Frame to Rear Frame - Connect
836K Landfill Compactor and 834K Wheel Dozer Machine Systems Front Frame from Rear Frame - Separate
836K Landfill Compactor and 834K Wheel Dozer Machine Systems Hydraulic Tank - Assemble
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Location of Components (Hydraulic System)
14L Motor Grader Catalyst (SCR) - Remove and Install
14L Motor Grader Pressure Sensor (ARD Combustion Air) - Remove and Install
14L Motor Grader Nitrogen Oxide Sensor - Remove and Install - Inlet
2014/01/23 New Air Dryer Is Now Used on Certain K and K Series 2 Motor Graders {4285}
Release Notes for Cat® MineStar v3.x.x System{7605} Release Notes for Cat® MineStar v3.x.x System{7605}
14L Motor Grader Nitrogen Oxide Sensor - Remove and Install - Outlet
2013/11/08 New Product Link and VIMS3G Software for 523, A4:N4 Modules Is Now Available for Certain Large Wheel Loaders {7601, 7606}
988K Wheel Loader, 834K Wheel Dozer and 836K Compactor Machine Systems Electrohydraulic Control (Joystick) - Remove and Install
14L Motor Grader Ignition Coil - Remove and Install - CEM
14L Motor Grader Inlet Module (Catalyst) - Remove and Install - Catalyst
Command for Underground Amber Machine Automation System Warning Light Circuit - Test
Command for Underground Server Software - Update - Machine Automation System (MAS)
Procedure to Rework the Air Conditioner Compressor Mount on R2900G and R3000H Load Haul Dump Machines{1802} Procedure to Rework the Air Conditioner Compressor Mount on R2900G and R3000H Load Haul Dump Machines{1802}
Command for Underground Radio Firmware - Update - MAS and LARN