Hydraulic Tank - Disassemble
Start By:
- Remove the hydraulic tank.
- Attach Tooling (A) and a suitable lifting device to cover assembly (1). The weight of cover (1) is approximately
50 kg (110 lb) . Remove bolts (2) and cover assembly (1) and gasket.Show/hide tableIllustration 2 g03501173 - Remove cap assembly (3).
Show/hide table
Illustration 3 g03501176 - Remove screen (4).
Show/hide table
Illustration 4 g03501196 - Remove retainer (5) and the sight glass.
Show/hide table
Illustration 5 g03501216 - Remove nuts (6).
Show/hide table
Illustration 6 g03501277 - Remove screens (7).
Show/hide table
Illustration 7 g03501280 - Remove bolts (8), drain plug (9), and the O-ring seal.
Show/hide table
Illustration 8 g03501300 - Remove housing (10) and the O-ring seal.
Show/hide table
Illustration 9 g03501319 - Remove valve (11).
Show/hide table
Illustration 10 g03501338 Show/hide tablePersonal injury can result from parts and/or covers under spring pressure.
Spring force will be released when covers are removed.
Be prepared to hold spring loaded covers as the bolts are loosened.
- Remove spring (12) and valve guide (13).
Show/hide table
Illustration 1 | g03501159 |
Caterpillar Information System:
14L Motor Grader Nozzle Heater Harness - Remove and Install
2014/03/05 New Chassis Software Is Now Available On Certain F Series Large Off-Highway Trucks {7620}
2014/03/25 New Exhaust Manifolds Are Used on 797 and 797B Off-Highway Trucks Equipped with 3524 Engines {1059}
836K Landfill Compactor and 834K Wheel Dozer Machine Systems Hydraulic Tank Guard - Remove and Install
2013/11/18 An Improved Differential Lock Oil Filter Element Is Now Used on Certain 24M Motor Grader {3004}
14L Motor Grader Air Control Valve (ARD Combustion) - Remove and Install
14L Motor Grader Relay (ARD Nozzle Heater) - Remove and Install
771D Off-Highway Truck TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 771D Off-Highway Truck TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
C4.4 Industrial Engine Engine Oil and Filter - Change
2013/12/06 Correction to Disassembly and Assembly , "Parking Brake - Install" for R1600H Load Haul Dump Machines {4267}
2013/12/06 Correction to Disassembly and Assembly , "Parking Brake - Assemble" for Certain R1600G Load Haul Dump Machines {4267}
2013/12/06 Correction to Disassembly and Assembly , "Parking Brake - Disassemble" for Certain R1600G Load Haul Dump Machines {4267}
14L Motor Grader Pressure Sensor (ARD Combustion Air) - Remove and Install
14L Motor Grader Catalyst (SCR) - Remove and Install
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Location of Components (Hydraulic System)
836K Landfill Compactor and 834K Wheel Dozer Machine Systems Hydraulic Tank - Assemble
836K Landfill Compactor and 834K Wheel Dozer Machine Systems Front Frame from Rear Frame - Separate
836K Landfill Compactor and 834K Wheel Dozer Machine Systems Front Frame to Rear Frame - Connect
2013/12/06 Correction to Disassembly and Assembly , "Parking Brake - Install" for Certain R1600G Load Haul Dump Machines {4267}
Check the STIC Control on Certain R1700G, R2900G and R3000H Load Haul Dump Machines{3034, 4343} Check the STIC Control on Certain R1700G, R2900G and R3000H Load Haul Dump Machines{3034, 4343}
2013/10/31 New Metering Pump Group Is Now Introduced in 424B Backhoe Loader {4312}
988K Wheel Loader, 834K Wheel Dozer and 836K Compactor Machine Systems Parking Brake - Remove and Install
2015/01/16 New Pin Assemblies are Now Used in the Truck Body Mounting Groups on Certain Off-Highway Trucks {7258, 7258}
966M and 972M Wheel Loaders Plate Locations and Film Locations