Aftercooler - Remove and Install
Removal Procedure
Start By:
- Remove the cooling system package.
- Remove bolts (1) and shroud (2). Remove skirt (3) .
Show/hide table
Illustration 1 | g03252316 |
- Remove condenser (4).
Show/hide table
Illustration 2 | g03252416 |
- Remove plate (5) .
Show/hide table
Illustration 3 | g03255398 |
- Remove plate (7) and aftercooler (6) .
Show/hide table
Illustration 4 | g03255437 |
Installation Procedure
- Install aftercooler (6) in the reverse order of removal.
Caterpillar Information System:
559C and 579C Knuckleboom Loaders Operator Station
424B and 424B HD Backhoe Loaders Power Train Axle Housing, Axle Shaft, and Wheel Flange - Install
521B and 522B Track Feller Bunchers Machine Systems Cab - Remove and Install
563C and 573C Wheel Feller Bunchers Seat Belt
C2.6 and C3.3B Engines for Caterpillar Built Machines Electric Starting Motor
424B and 424B HD Backhoe Loaders Power Train Axle Housing, Axle Shaft, and Wheel Flange - Remove
C2.6 and C3.3B Engines for Caterpillar Built Machines Alternator and Regulator
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562} Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
424B and 424B HD Backhoe Loaders Power Train Final Drive Planetary - Assemble
CD54B Vibratory Asphalt Compactor Propel System Piston Pump Neutral - Test and Adjust - Mechanical, Split Drum
Procedure to Install an Additional Steering Oil Cooler on the 789D Off-Highway Truck{0679, 1353, 1377, 4304, 4346, 5057} Procedure to Install an Additional Steering Oil Cooler on the 789D Off-Highway Truck{0679, 1353, 1377, 4304, 4346, 5057}
424B and 424B HD Backhoe Loaders Power Train Final Drive Planetary - Disassemble
950M, 962M, 966M, 972M, 980M, 982M, 950M Z and 962M Z Wheel Loaders General Hazard Information - Only Japanese market
559C and 579C Knuckleboom Loaders Engine and Machine Warm-Up
369-6017 Transmission Lifting Plate for D6R{0599, 0629, 0632, 3030} 369-6017 Transmission Lifting Plate for D6R{0599, 0629, 0632, 3030}
2012/11/09 New Spindle is Now Used on Certain R2900G Load Haul Dump Machines {4050, 4251}
424B and 424B HD Backhoe Loaders Power Train Axle Housing, Axle Shaft, and Wheel Flange - Disassemble
Alternator - Bosch K1/N1 General Information
Alternator - Bosch K1/N1 Service Tools
Alternator - Bosch K1/N1 Diode Assembly - Test
C1.5 and C2.2 Engines for Caterpillar Built Machines System Configuration Parameters
424B and 424B HD Backhoe Loaders Power Train Axle Housing, Axle Shaft, and Wheel Flange - Assemble
C1.5 and C2.2 Engines for Caterpillar Built Machines Replacing the ECM
2012/10/03 A New Front Track Idler Arm Is Now Available on Certain Asphalt Pavers {4151}