Diode Assembly - Test
Show/hide table
 | |
| Illustration 1 | g03279456 |
Diode Assembly (1) Terminal (2) Terminals | |
- Remove the diode assembly from the alternator.
- Set the multimeter to the diode scale.
- Connect the multimeter leads across terminal (1) and one terminal (2) .
- Record the multimeter reading.
- Reverse the multimeter leads.
- Record the multimeter reading.
Expected Result: One reading is "0L" and the other reading is .4 to .9 volts.
Results:
OK - One reading is "0L" and the other reading is .4 to .9 volts. The diode is normal. Repeat steps 3 through 6 for the other terminals (2). If all of the diodes are normal, the diode assembly is normal. STOP.
NOT OK - Both readings are "00". The diode assembly is shorted. Replace the diode assembly. STOP.
NOT OK - Both readings are "0L". The diode assembly is open. Replace the diode assembly. STOP.
Caterpillar Information System:
Alternator - Bosch K1/N1 Service Tools
Alternator - Bosch K1/N1 General Information
424B and 424B HD Backhoe Loaders Power Train Axle Housing, Axle Shaft, and Wheel Flange - Disassemble
2012/11/09 New Spindle is Now Used on Certain R2900G Load Haul Dump Machines {4050, 4251}
369-6017 Transmission Lifting Plate for D6R{0599, 0629, 0632, 3030} 369-6017 Transmission Lifting Plate for D6R{0599, 0629, 0632, 3030}
559C and 579C Knuckleboom Loaders Engine and Machine Warm-Up
950M, 962M, 966M, 972M, 980M, 982M, 950M Z and 962M Z Wheel Loaders General Hazard Information - Only Japanese market
450F Backhoe Loader Engine Supplement Aftercooler - Remove and Install
559C and 579C Knuckleboom Loaders Operator Station
424B and 424B HD Backhoe Loaders Power Train Axle Housing, Axle Shaft, and Wheel Flange - Install
521B and 522B Track Feller Bunchers Machine Systems Cab - Remove and Install
563C and 573C Wheel Feller Bunchers Seat Belt
C1.5 and C2.2 Engines for Caterpillar Built Machines System Configuration Parameters
424B and 424B HD Backhoe Loaders Power Train Axle Housing, Axle Shaft, and Wheel Flange - Assemble
C1.5 and C2.2 Engines for Caterpillar Built Machines Replacing the ECM
2012/10/03 A New Front Track Idler Arm Is Now Available on Certain Asphalt Pavers {4151}
CD54B Vibratory Asphalt Compactor Propel System Pump Control (Electronic Displacement Control) Neutral - Test and Adjust - Split Drum
950M, 962M, 966M, 972M, 980M, 982M, 950M Z and 962M Z Wheel Loaders Operation Information
450F Backhoe Loader Engine Supplement Cooling System Package (Radiator, Aftercooler, Hydraulic Oil Cooler, Fuel Cooler) - Remove and Install
2012/10/16 Improved Latch is Now Used Certain Grenoble Built Machines {1401, 7252, 726A, 7273}
777G Off-Highway Truck TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 777G Off-Highway Truck TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
CD54B Vibratory Asphalt Compactor Propel System Piston Pump Neutral - Test and Adjust - Mechanical, Solid Drum
2013/03/05 A New Brake Accumulator Group is Now Used on the 797F Off-Highway Truck {4263}
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Oil Level - Test