2012/10/03 Caterpillar


A New Front Track Idler Arm Is Now Available on Certain Asphalt Pavers {4151}

Usage:

AP-555E A5D
Asphalt Paver:
AP-1055D (S/N: FAC1-UP)
AP1055E (S/N: TJF1-UP; TRS1-UP)
AP555E (S/N: A5D1-UP)
AP655D (S/N: GNZ1-UP)
BG1055E (S/N: FRR1-UP)
BG555E (S/N: B5P1-UP)
BG655D (S/N: B5D1-UP)
Service Magazine SEPD1506, 3 October 2012, "A New Front Track Idler Arm Is Now Available on Certain Asphalt Pavers". Disregard this article. Use the following article.

Description of Change: A longer idler wheel arm 366-8397 is now available. This component will allow for longer track and under carriage life by allowing for more track wear. The lower arm adds additional range for the tension cylinder to account for more undercarriage wear.

Adaptable To: 366-8397 Arm will replace the 179-6983 Arm .

The effectivity for this change is shown in Table 1.

Table 1
Effectivity    
Model     Adaptable to Machine     Effective With Machine    
AP1055E     S/N:TJF1-274     S/N:TJF275-UP    
AP1055E     S/N:TRS1-136     S/N:TRS137-UP    
AP555E     S/N:A5D1-272     S/N:A5D273-UP    
AP655D     S/N:GNZ1-469     S/N:GNZ470-UP    
BG1055E     S/N:FRR1-99     S/N:FRR100-UP    
BG555E     S/N:B5P1-100     S/N:B5P101-UP    
BG655D     S/N:B5D1-99     S/N:B5D100-UP    
AP-1055D     S/N:FAC1-UP     S/N:FAC1-UP    

Caterpillar Information System:

C1.5 and C2.2 Engines for Caterpillar Built Machines Replacing the ECM
424B and 424B HD Backhoe Loaders Power Train Axle Housing, Axle Shaft, and Wheel Flange - Assemble
C1.5 and C2.2 Engines for Caterpillar Built Machines System Configuration Parameters
Alternator - Bosch K1/N1 Diode Assembly - Test
Alternator - Bosch K1/N1 Service Tools
Alternator - Bosch K1/N1 General Information
424B and 424B HD Backhoe Loaders Power Train Axle Housing, Axle Shaft, and Wheel Flange - Disassemble
2012/11/09 New Spindle is Now Used on Certain R2900G Load Haul Dump Machines {4050, 4251}
369-6017 Transmission Lifting Plate for D6R{0599, 0629, 0632, 3030} 369-6017 Transmission Lifting Plate for D6R{0599, 0629, 0632, 3030}
559C and 579C Knuckleboom Loaders Engine and Machine Warm-Up
950M, 962M, 966M, 972M, 980M, 982M, 950M Z and 962M Z Wheel Loaders General Hazard Information - Only Japanese market
450F Backhoe Loader Engine Supplement Aftercooler - Remove and Install
CD54B Vibratory Asphalt Compactor Propel System Pump Control (Electronic Displacement Control) Neutral - Test and Adjust - Split Drum
950M, 962M, 966M, 972M, 980M, 982M, 950M Z and 962M Z Wheel Loaders Operation Information
450F Backhoe Loader Engine Supplement Cooling System Package (Radiator, Aftercooler, Hydraulic Oil Cooler, Fuel Cooler) - Remove and Install
2012/10/16 Improved Latch is Now Used Certain Grenoble Built Machines {1401, 7252, 726A, 7273}
777G Off-Highway Truck TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 777G Off-Highway Truck TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
CD54B Vibratory Asphalt Compactor Propel System Piston Pump Neutral - Test and Adjust - Mechanical, Solid Drum
2013/03/05 A New Brake Accumulator Group is Now Used on the 797F Off-Highway Truck {4263}
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Oil Level - Test
559C and 579C Knuckleboom Loaders Swing System
559C and 579C Knuckleboom Loaders Swivel
559C and 579C Knuckleboom Loaders Pump Coupling
559C and 579C Knuckleboom Loaders Hydraulic Tank and Filter
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.