Axle Housing, Axle Shaft, and Wheel Flange - Install
Installation Procedure
Note: Align the location marks that were made during the removal procedure.
- Attach a suitable lifting device onto axle housing, axle shaft, and wheel flange (3) . The weight of axle housing, axle shaft, and wheel flange (3) is approximately 31 kg (68 lb). Position axle housing, axle shaft, and wheel flange (3) onto brake cylinder assembly (2) .
Show/hide table
 | |
| Illustration 1 | g03652778 |
- Install bolts (1) . Tighten bolts (1) in the sequence shown to a torque of 123.5 ± 13.0 N·m (91.1 ± 9.6 lb ft).
Show/hide table
 | |
| Illustration 2 | g03252176 |
- Repeat Steps 1 and 2 for another side.
- Fill the axle with oil. Refer to Operation and Maintenance Manual, SEBU9920, "Differential Oil (Rear) Change"
End By:
- Install the final drive planetary.
- Install the rear axle.
Caterpillar Information System:
521B and 522B Track Feller Bunchers Machine Systems Cab - Remove and Install
563C and 573C Wheel Feller Bunchers Seat Belt
C2.6 and C3.3B Engines for Caterpillar Built Machines Electric Starting Motor
424B and 424B HD Backhoe Loaders Power Train Axle Housing, Axle Shaft, and Wheel Flange - Remove
C2.6 and C3.3B Engines for Caterpillar Built Machines Alternator and Regulator
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562} Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
424B and 424B HD Backhoe Loaders Power Train Final Drive Planetary - Assemble
CD54B Vibratory Asphalt Compactor Propel System Piston Pump Neutral - Test and Adjust - Mechanical, Split Drum
Procedure to Install an Additional Steering Oil Cooler on the 789D Off-Highway Truck{0679, 1353, 1377, 4304, 4346, 5057} Procedure to Install an Additional Steering Oil Cooler on the 789D Off-Highway Truck{0679, 1353, 1377, 4304, 4346, 5057}
424B and 424B HD Backhoe Loaders Power Train Final Drive Planetary - Disassemble
CD54B Vibratory Asphalt Compactor Propel System Speed Sensor (Propel Motor) - Test - Solid Drum
424B and 424B HD Backhoe Loaders Power Train Final Drive Planetary - Install
559C and 579C Knuckleboom Loaders Operator Station
450F Backhoe Loader Engine Supplement Aftercooler - Remove and Install
950M, 962M, 966M, 972M, 980M, 982M, 950M Z and 962M Z Wheel Loaders General Hazard Information - Only Japanese market
559C and 579C Knuckleboom Loaders Engine and Machine Warm-Up
369-6017 Transmission Lifting Plate for D6R{0599, 0629, 0632, 3030} 369-6017 Transmission Lifting Plate for D6R{0599, 0629, 0632, 3030}
2012/11/09 New Spindle is Now Used on Certain R2900G Load Haul Dump Machines {4050, 4251}
424B and 424B HD Backhoe Loaders Power Train Axle Housing, Axle Shaft, and Wheel Flange - Disassemble
Alternator - Bosch K1/N1 General Information
Alternator - Bosch K1/N1 Service Tools
Alternator - Bosch K1/N1 Diode Assembly - Test
C1.5 and C2.2 Engines for Caterpillar Built Machines System Configuration Parameters
424B and 424B HD Backhoe Loaders Power Train Axle Housing, Axle Shaft, and Wheel Flange - Assemble