1991/11/25 Caterpillar


New Turbocharger Turbine Nozzle Provides Higher Boost And Lower Exhaust Temperatures{1052}

Usage:


3516 (25Z) Generator Set Engines

Reference: This article supersedes a previous article in the July 22, 1991 issue.

Description of Change: A new turbine nozzle is used in turbine housing on the turbochargers on generator set engines used for prime or continuous power. This change applies ONLY to 50 Hertz, 1500 rpm engines.

The new turbine nozzle will provide higher boost and lower exhaust temperatures. This will result in increased service life from the exhaust valves in applications where the engine is operated at steady high loads.


Location of new 4W9132 Turbine Nozzle in 7E0674 Turbocharger Group.

Adaptable To: The new 4W9132 Turbine Nozzle is a direct replacement for the former 2W8330 Turbine Nozzle in the 7E0674 Turbocharger Group on 50 Hertz, 1500 rpm generator sets ONLY. The new nozzle is in effect with 3516 Generator Set Engine 25Z2362.

Caterpillar Information System:

1991/11/25 Improved 6P3236 Fan Switch{7300,7316,7332}
1991/11/18 New Auxiliary Water Pump Groups Used{1371}
1991/11/11 Computerized Monitoring System (CMS) Has Improved Electrical System Monitoring{7400}
1991/10/21 How To Repair Oil Leaks Between Front Housing And Spacer Deck {1221}
1991/10/21 New Oil Pump Used As Service Replacement {3310}
1991/10/14 End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14 New Piston Pin Retainer Used{1225}
1991/10/14 No Gaskets Used With Aluminum Flywheel Housings{1157}
1991/10/14 7S3161 Valve Lifter Has Three Different Designs{1209}
1991/10/14 New Components Used In Fuel Injection Pump Groups{1290}
1991/10/14 New Teflon Coated 4P9388 Cylinder Seal Available{1216}
1991/10/14 New Locking Bolt Used In Flywheel Groups{1156}
1991/11/25 New Spider Assembly Used In Fan Groups{1356}
1991/11/25 9Y5885 Shorting Plug Assembly Available To Aid Troubleshooting{1550}
1991/11/25 Only Caterpillar Approved Service Tools Can Be Used To Program Or Perform Interactive Diagnostics On Caterpillar Engines{1900}
1991/11/25 Fitting Needed To Install New Oil Pressure Switch When Replacing Former Switches{7485}
1991/12/02 Deutsch DRC (Rectangular) Connectors Now Used{1400}
1991/12/02 Service Tips For Removing Turbocharger Turbine Housing{1065,1052}
1991/12/02 New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/16 New 6I2378 Cylinder Head Assembly With Threaded Intake And Exhaust Valve Guides Available{1104,1101}
1991/12/23 New Cylinder Head Gasket Helps Prevent Coolant Leaks{1124}
1991/12/23 New Locknut Used In Exhaust Manifold Group{1059}
1992/01/20 New Quick Release Fuel Cap Assembly Replaces Screw On Fuel Caps{1273}
1992/01/20 Use Correct Washers With Cylinder Head Bolts{1100}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.